Drilling Mud Pump For BOMCO Horizontal Triplex Single F-1300 Mud
The function of the mud pump
In drilling oil and natural gas wells, it is used to pump drilling
fluid mud to make it circulate and flow for impact. According to
the importance of its
work, it is compared to the heart of the drilling rig.
Mud circulation is a key operation in the rotary drilling process,
and its main functions are as follows:
1. Remove cuttings from the bottom of the well and carry them to
the surface through the annular space.
2. Make mud cake on the well wall to prevent the well wall from
3. Balance or control the pressure of oil, gas and water layers in
the drilled well section to prevent blowout.
4. Handle complex situations downhole. If the bottom of the crack
is encountered, the plugging material is pumped, and when the drill
is stuck, the
crude oil and diesel oil are pumped to release the stuck.
5. Cool the drill bit and lubricate the rotating drill string.
F1300 Mud Pump Technical Parameter
|Type||Horizontal Triplex Single Acting Piston Pump||Gear Type||Herringbone|
|Rated Power,HP(kw)||1300(969)||Gear Ratio||4.206:1|
|Rated Pump Speed,SPM||120||Maximum Liner Size by Stroke Length,inches(mm)||7"×12"(180×305)|
|Suction Connection ,inches||12||Valve Pot||API#7|
|Discharge flange,inches||5||Pinion shaft dia.In(mm)||8-1/2"(215.9mm)|
|Stroke S/Minute||Power Rating||Liner Size. Mm Pressure Rating. Mpa(psi)|
|KW||HP||Displacement L/S (GPM)|
|1|| || ||0.3878||0.3459||0.3064||0.2693||0.2346||0.2023|
LS:3NB-1300C, 3NB-1000, 3NB-1000C,3NB-800
Oil WELL:A-350-PT, A-650-PT,A-850-PT, A-1100-PT, A-1400-PT,
WEATHERFORD:MP-5, MP-8, MP-10, MP-13, MP-16
NATIONAL: 7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-P-220,
C-250,C-350, K-380, K-500-A, K-700
GARDNER DENVER:PZ-7, PZ-8, PZ-9,PZ-10,PZ-11