Annealed (A or TB00) Beryllium Bronze Bar C17000 For Electrical
Product Name: Annealed (A or TB00) Beryllium Bronze Bar
Diameter Range: 6mm~50mm
Length: 2m, 3m, 5m, 6m or as required
State: Annealed (A or TB00)
Fabrication and Heat Treatment of C17000 Copper Alloy:
|Welding||Welding methods such as soldering, brazing, gas shielded arc
welding, coated metal arc welding, spot welding, seam welding and
butt welding are preferred for C17000 copper alloys. Oxyacetylene
welding is not recommended for this type of alloys.|
|Machinability||The machinability rating of C17000 copper alloys is 20%.|
|Forging||C17000 copper alloys are forged at temperature ranging from 649 to
816°C (1200 to 1500°F).|
|Hot Working||C17000 copper alloys have good hot working property.|
|Cold Working||C17000 copper alloys have excellent cold working property.|
|Annealing||C17000 copper alloys are annealed at temperature ranging from 774
to 802°C (1425 to 1475°F).|
Product Informance of CUBERYLLIUM® Company:
CUBERYLLIUM® manufactures copper beryllium in several distinct compositions.
These fall into two categories: alloys selected for high strength
(Alloys 172,173,170) and alloys selected for high conductivity
(Alloys 751,750,741). And Gost standard QBe2,QBe1.9Ti for Russia
Market. Also Supply Master alloy : CuBeryllium-200;
CuBeryllium-275);CuBeryllium-350 and Cuberyllium-400 to global
CUBERYLLIUM ®-170 also named Cube1.7-C17000 (CDA 170) Beryllium Copper is a lightly alloyed grade of copper, formulated for primary
forming into wrought products. CW100C is the EN numeric designation
for this material. Alloy170 is the UNS number. Additionally, the EN
chemical designation is CuBe1,7. And the British Standard (BS)
designation is CB101. Older literature may refer to this material
as ASTM Alloy 165, but this is now discouraged.
It has a moderately low electrical conductivity among wrought
coppers. In addition, it has a moderately low melting temperature
and a moderately low thermal conductivity.
The properties of Alloy170 copper include fourteen common
variations. This page shows summary ranges across all of them. For
more specific values, follow the links immediately below. The graph
bars on the material properties cards further below compare Alloy
170 copper to: wrought coppers (top), all copper alloys (middle),
and the entire database (bottom). A full bar means this is the
highest value in the relevant set. A half-full bar means it's 50%
of the highest, and so on.
Chemical Composition of Beryllium Bronze Alloy C17000:
|Cuberyllium-170||C17000||1.60-1.79||0.20 min||0.6 max||0.02 max||Balance|
Common Standard Specification of Beryllium Bronze Alloy C17000:
Rod: ASTM B 196, SAE J 461, 463
Forgings and Extrusions : ASTM B570
Sheet: ASTM B 194
Typical Physical Properties of Beryllium Bronze Alloy C17000:
|Cuberyllium Brand||Density lb/cu.in.||Elastic Modulus||Thermal Expansion Coefficient||Thermal Conductivity Btu/(ft•hr•°F)||Melting Temp.|
|106 psi||in/in/°F, 70°F to 400°F||°F|
|170||0.304||19||9.7 x 10 -6||60||1600-1800|
Mechanical Properties of Beryllium Bronze Bar C17000:
|Tensile Strength||Yield Offset||Elongation||Hardness|
|x 1000 P.S.I.||0.2% offset x 1000 P.S.I.||% in 2 Inches||.020 Gauge and Above|
|TM00||AM||100 - 110||70 - 95||18 -~30||B 98|
|TM01||1/4HM||110 - 120||80 - 110||15 ~ 25||C 20 - 26|
|TM02||1/2HM||120 - 135||95 - 125||12~22||C 24 - 30|
|TM04||HM||135 - 150||110 - 135||9~20||C 28 - 35|
|TM05||SHM||150 - 160||125 - 140||9~18||C 31 - 37|
|TM06||XHM||155 - 175||135 - 165||3~10||C 32 - 38|
|Hardness Legend B : Rockwell (100 kgf Steel Sphere) C: Rockwell
(150 kgf Diamond Cone)|
|NOTE: The information contained herein are intended for reference
and comparison purposes only. They should NOT be used as a basis
for design specifications or quality control. It is given without
obligation or liability. Contact us for manufacturers' complete
material property datasheets.|
Q1:Could you produce Beryllium Copper strip by Mill Hardened
A1:Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06)
XHMS(TM08).,we are the only factory could do harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2:We are the only one who melting by Vacuum semi-Continuous
3:Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3:Could be get the Cast ingot without gas,smaller segregation,
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the
amount is different.