Drilling Mud High-Pressure Shear Pump Units For Barite And
The Shear Pump is used to shear, refine, mix polymer, bentonite,
etc drilling mud material. It can remove "fish-eye" to help to
drill fluid achieve high properties for oil drilling. Sunbo
Shearing pump can save over 30% bentonite. As one very important
equipment within the drilling fluid circulating system, shearing
pumps perform the dual function of cutting and pumping, making the
drilling fluid ideally suited for every drilling requirement of
reducing solids size, and protect its downstream equipment.
Shear Pump Specification
|Warranty:||1 year||Customized support:||OEM|
|Brand Name||AIPU||Model Num.||APJQB6545|
|Place of Origin||Shaanxi, China||Application||Machining|
|Horse Power||360||Power Source||Electric|
|Cable length||DF31/8-21||Out Size||5''|
|Usage||barite mixing||Standard or non-standard||Standard|
|theory||Centri-force||Product name||Shear pump|
Drilling mud shear pump is specially used to shear polymer and clay
in drilling fluid. The polymer or clay in drilling fluid should be
sufficiently cut before entering the drilling fluid system, which
is helpful for the polymer to play an effective function and
improve drilling performance. If the polymer is not fully cut, it
may block the shale shaker screen in the first cycle and results in
a large amount of loss, increasing the cost of drilling and making
large size solid particles in the drilling fluid become hard and
difficult to remove.
The shear pump is specially designed with the impeller holding jags
to process the drilling mud mixed with clay and polymer.
Details of drilling mud shear pump
The Shearing pump consists of the impeller, casing, packing, shaft,
belt, pulley, motor, base, and so on. The difference with other
pump impellers is a more complicated structure. There are axial
whirl flow, fluids reserve compartment, pump wheel, pressure cabin,
The axial flow whirl provides a certain quantity of fluids to the
pump wheel and reserve cabin, 50% of this part fluids will flow
into the reserved cabin, and the other half part flows into the
casing. A pressure cabin is a special design to make sure fluids
cabin holding drilling mud. The fluids flow is parallel to the
shearing plate and introduces high flow velocity
Why select APJQB series shearing pumps?
There are many features of the shearing pump as follows. High
efficiency, high flow rate, high lead, mechanical sealed. It can
help get higher performance and a better shearing effect. Faster
hydration and dilution processes, meet the requirements of many
different job sites. Saving the cost and time for the user. For
bentonite use, it can save cost up to 30%
Operating the AIPU shear pump, the shearing and hydration system
will be a mature and complete system.
Shear pump for drilling fluids solids control
APJQB series Shear Pump is special-purpose equipment of the solids
control system which can meet all customers’ requirements of
preparing drilling fluid for the well drilling. This shear pump
manufactured by Aipu company is used to treat the high property
mud, make the mud to obtain good rheological properties and cut the
drilling cost as much as possible. This ideal solids control
equipment designed by GN’s engineers has high performance and
gained customers’ high evaluation.
Moreover, the shear pump can be customized according to practical
working conditions and the user's special requirements. For
example, it can be fit on a big rectangular base or a smaller area
base. And the vertical angle can be adjusted accordingly.
If you have any demand for a drilling fluids shearing pump, Or you
are interested in any other mud equipment. Please feel free to
contact AIPU Solids. Trust you will get the real cost-effective
solution at the best rate.