GDI injectors & Other injectors 220V Injector Volts Fuel
Injector Tester Cleaner And Tester
Equipment Description :
This equipment is composed of 2 different parts:
1. Work bench
2. Ultrasonic washing tank
3. Control Screen
1. All equipment are delivered with 3 pin electrical cable, use the
ground connection for equipment and operator protection.
2. Verify that test liquid level at 2.5L or at least between the range of two red lines. For
a new machine, please fill 2.0~ 2.5L testing liquid. Never fill up
the tank at its maximum capacity.
3. Fill up the ultrasonic cleaning tank with the liquid for
injector cleaning. Liquid level should not reach 3 cm below the
tank edge, in order to avoid liquid overflow on device. Take
special care not to drop liquid on the equipment when filling up or
emptying the tank.
Technical Characteristics :
· Appearance size:500(W)´500(D)´670mm(H) (not include ultrasonic
· Net Weight: 42 kgs
· Temperature Scope of Operation: -10℃~+40℃
Work Voltage 220 Volts AC 50 Hz.
· Test Liquid Tank Volume: 3L
· Testing Tube Volume: 200 ml
· Ultrasonic Frequency: 25 kHz
· Ultrasonic Power: 75W
· Maximum Testing Number of Cylinder: 4
· Rotation Speed: 0~9900 r/min step 50 r/min
· Pulse Duration: 1~20 ms step 0.1 ms· In
· Oil Pressure: 0~800kpa(8.0kg/cm2) (adjustable)
· 75 Watts /25KHz ultrasonic diagnostic and cleaning of injectors,
with capacity of stainless steel tank for 3L.
· Includes cables/adapters for connection of multi-purpose &
· Micro processed equipment, totally programmable.