The Character of the EPS sandwich panel forming machine
1, Light weight: less than 24KG per square meter weight, can fully
reduce the structural cost
2, Heat insulation: the composite board commonly used insulation
materials, rock wool, glass fiber cotton, polystyrene, polyurethane
and so on, low thermal conductivity, with good insulation effect.
3, Fire prevention: color steel composite core board of the surface
material and insulation material for non flammable or refractory
material, can fully meet the fire code requirements.
4, Environmental protection, noise: the composite board sound
insulation strength of up to 40-50 decibels, is very effective
sound insulation materials.
5, Plasticity: profiled steel plate can be arbitrarily cut, to meet
the needs of special design.
The parameter of the EPS sandwich panel forming machine
980 EPS sandwich panel forming machine
Processes and components
Un-coiler-Roll forming machine-Feeding device-Composit forming
machine-Sheet cutting device-Receiving table
Suitable to process
Feeding width for roof
Feeding width for wall
Feeding device:5.1m in length
Composit forming machine:6000*2230*2400m(Length *Width*Height)
EPS sandwich panel forming machine table:6m
Requirement of workshop
380V 50-60Hz, 3 phase
nude, with waterproof cloth and stow-wood. The computer controlled
cabinet is packed with waterproof cloth and box. The seller should
guarantee equipments will be moisture-proof,anticorrosive, and will
not be damaged during transportation.
30% Deposit by T/T , 70% balance paid after inspection before
delivery by T/T
The Seller guarantees the equipment will be ready for shipment
within 20-30 working days after receipt of deposit from the Buyer.
We could send the technician to your country to fix the machine if
one 40ft open top container and one 40ft ordinary container to hold
The price valid time
The Components of EPS sandwich panel forming machine
(1) Manual Decoiler (Max.Capacity:5T Coil Inner-Diameter: 508mm)
(2)Roll-Forming M/C (Just for your reference, will make the machine as your drawing)
It adopts hydraulic motor drive and automatic location to decide
the dimension and cut the target products.
(4) Hydraulic System
Match equipment: a set of hydraulic tank , a set of hydraulic oil
pump, two hydraulic pipes and two sets of electromagnetism valves.
Hydraulic pump power: 4KW
(5)Computer control cabinet :
1). Screen: DELTA screen from Taiwan
2) PLC: DELTA
3). Automatic length measurement
4). Automatic quantity measurement
5).Computer is used to control length and quantity. Machine will
automatically cut to length and stop when required quantity is
One counter gauges length, pulses, and decides length
(7)Output table (3M one set)