This cabinet is widely used in FTTX access network.It provides
splice,storage,termination,splitting,customer cable routing
functions etc.,without cables patching,which effectively solves the
problems resulted by traditional distribution devices,less adaptors
and patch cords,less loss rate and defect points,safer network,more
capacity,convenient for cable management and upgrading,cost
saving,and promoting the development of optical fibers.
1. The shell of this equipment is made of high intensity,
anti-corrosive, anti-aging special composite material. It can
effectively prevent rain, snow, insects and corrosive gases and
other environmental impact.
2. Structural design is reasonable, using single-side and single
lockable door. There is a large space in the cabinets. It’s easy to
operate and maintain.
3. Have grounding device.
4. Give full consideration to fix, earthing and welding cable, to
coil the redundant cable. It’s very convenient for connecting and
scheduling the cable.
5. Internal optical path clearly marked, welding, coiling position
6. Compact structure, easy installation and excellent sealing
7. Using splicing & distribution integration module with
fusion, connection and storage in integration. It’s available for
different adaptors such as FC, SC, LC type. Adaptors assembling
with deflexion of 30° to ensure fiber pigtail bending radius and to
avoiding the light direct the eyes when operating.
8. Can integrate splitter, WDM.
9. For ribbon and non-ribbon cable.
10. Meet UL94-V0 standard.
Main Technical Specifications
Standard working wavelength: 1310nm～1550nm
The insertion loss for the connectors ≤0.3dB
The insulation resistance between the grounding device and the
metal accessories in the cabinet ≥2×104MΩ
Temperature performance: place it in the (-55℃～55℃)±2℃ environment
about 16 hours, the performance will not be effected after 1 hours
resuming in normal temperature.
Thermal performance: the box is made of special material with
superior heat insulation performance.
Sealing performance: dustproof, superior GB4208/1P53 requirements.
Waterproofing: the water droplets will not enter in the box after
being caught in the rain in 15 minutes with 80Kpa pressure
Cabinet static load capacity:shell cover ≥1000N
Lateral surface ≥500N
Door hinge ≥300N
Anti-shock capability: using the impact test bed, in the X,Y,Z
three axis to impose six each, the peak acceleration is 300m/ S2
,duration 6ms of the impact, without any damage and injuries.
Collision durability ≥250N/cm2
Seal of life: more than 10 years
Fiber bending radius: No matter where they turn, the radius of
curvature of the fiber > 40mm when they are coiled in the box.
|Model||Size(W*D*H mm)||Max Capacity|