Home > Toy Guns >

Non Stick Coated Expanding Foam Gun Popular in North America and Europe Aluminum Alloy All Teflon Coated Teflon foam gun

Categories Air Foam Guns
Model Number: G-4
Certification: CE
Place of Origin: China
MOQ: 100pcs
Payment Terms: T/T, Western Union
Supply Ability: 5000pcs /Month
Delivery Time: 15-30days
Packaging Details: 50*31.5*27cm,color box,20pcs/carton
Material: Aluminum Alloy
Handle Material: Metail
Nozzle: Brass
Package: Color Box
  • Product Details
  • Company Profile

Non Stick Coated Expanding Foam Gun Popular in North America and Europe Aluminum Alloy All Teflon Coated Teflon foam gun

G-4 Air Foam Gun :


This PU foam gun is designed for the professional application of polyurethane foam assembling, filling and general purposes. It is highly suitable for the environment-friendly low-cost use of polyurethane foam bottles. The gun is suitable for controlling spray and accurate filling of joints, making it fast, simple, accurate and safe to mount components such as door and window frames.

Adapter:ZincGun body:Plastic
Gasket nut:BrassRegulation wheel:Brass
Handle:PPG.W. /CTN:12.5 kgs

Plastic Air Foam Gun G-4 Application Range:

1. Fire block
Seal plumbing venting systems, seal plumbing penetrations, seal concealed electrical penetrations,
Seal recessed light fixtures, seal duct work penetrations between floors
2. Spray foam
Insulate and seal corners of joining materials, insulate wall cavities, insulate and seal ceiling floor,
Insulate and seal underside of bath tub, insulate and seal rim and band joints
3. Window & door
Seal window frames, seal door frames, seal skylights
4. Sealant
Seal attic hatchways, seal exterior plumbing penetrations, seal gas line penetrations, seal exhaust
Fans, seal electrical outlets, seal sill plates, seal dryer vents

Introduction :

1. Rocking the pu foam pot harshly before setting on the pistole.
2. Rolling the pu foam pot to the adapter(not too tight).
3. Pull the trigger and let the pu foam flow out for 2 seconds in order to fill the gun barrel with pu foam without air or other gas.
4. The pu foam pot should be vertical to the earth level when working
5. Control the pu foam flowing rate by adjusting the adjustment wheel.
6. Rock a new pu foam pot beforing changing it and put the new one on the gun as soon as the old one is put down(in 1 minute).
7. No other substances is allowed to get into the adapter when changing the pu foam pot, since it would stick the gun inside if something goes in.
8. Not seperated, the gun and the pu foam pot should both be put vertically when not working.
9. For washing and cleaning, the detergent should be put inside immediately after taking down the pu foam pot and should not be taken away until working next time.
10. Fix the needle on the nozzle when working. But note: The needle should be taken apart from the gun and cleaned, and no hardware is allowed to clean the needle, since it may hurt the needle and lead to leakage.
11. Handle with care.


Q1. How to use?

A: 1. before use, shake up the foam tank top and bottom to 1 minute

2. screw the tank to the adaptor, remember not too tight

3. press the trigger, let the foam flow for 10 seconds to eliminate the air in the barrel

4. if you want to contral the output of foam, you can adjust the adjusting screw, the tighter the adjusting screw,

the less the output.

5. after use, you should clean up the foam gun with cleaning agent.

Q2. Our Services

A: 1.Producing high quality foam guns for 14 years

2.High quality guarantee and young team

3.Any response from customers will be highly appreciated.

4.Certification: ISO9001,CE

5.High quality, competitive price,satisfactory service for your review.

6.Send samples by DHL , TNT OR EMS OR UPS, samples are free, you should pay freight fee, but we will

return it when you take order.

Q3. What is your foam gun sample making time?

A: 1-2days.

Q4. What is your shipping way?

A: By sea,by air,by express. Any shipping way is available.

Q5. What is your mass products delivery time?

A: 25-50days. Exact time should be accord to the style, QTY

Q6. What is your foam gun payment?

A: if your order is small, we use 100%TT, if your order is big,we use 30%TT

Q7. Can we order the color we want?

A: Yes,we can make any color you want

Q8. What is your foam gun sample fee?

A: sample is free, but you should pay freight fee, we will return it when you take order.

Q9. Can you do custom logo on thefoam gun?

A: Yes,we can do custom logos .

Quality Non Stick Coated Expanding Foam Gun Popular in North America and Europe Aluminum Alloy All Teflon Coated Teflon foam gun for sale
Send your message to this supplier
Characters Remaining: (0/3000)
You may also be interested in :
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    More from this Supplier
    Contact Us Quickly