Long Tube Appearance Tungsten Carbide Dies Made For Special
Tungsten carbide wire drawing wire are used in both drawing and
extrusion machines where material is forced under pressure through
the die. They can draw different material like mild steel, high
carbon, stainless steel, brass, aluminum etc. And they could long
time ensure the high surface roughness for high speed roughness for
high-speed drawn process.
There are various sizes you can choose, and we can produce
according to your design.
Features: Tungsten carbide drawing dies is a class of materials widely used
in drawing wires and rods because of their superior strength,
toughness and wear resistance. All major wire producers can use
drawing dies, which include wire drawing dies, tube drawing dies,
bar drawing dies.
Grade and Application:
|Grade||Hardness(HRA)||TRS N/mm2||Density g/cm3||Application recommend|
|YG6X||92||1800||14.9||it can be used to make steel wire,non-ferrous metal wire or bar
material with less|
than 6.0mm diameter.
|YG6||90.5||2000||14.9||it can be used for steel wire,non-ferrous metal and alloy bars
under 20mm diameter,and can be also used for drawing pipes with
diameter of less than 10mm.|
|YG8||90||2200||14.7||can be used in steel,non-ferrous metal and alloy bars and
pipes,also can be used in manufactureing machinery parts,tools and
|YG11||88.5||2300||14.4||it can be used fo rhigh compression steel rod and steel pipe
drawing,and the top hammer,perforation and stamping die of working
under great stress.|
|YG20||85||2800||13.6||it can be used for stamping die,such as punching watch
shell,tooth paste mould,small size steel ball,screw,nut,etc.
|YG20C||83.5||2800||13.6||it can be used in standard parts,bearings,tools and other
industries for cold forging,cold pressing mould,warhead and shell
Several issues to consider when designing tungsten carbide die
1. Selected part object. It must have a high yield, good structural
shape, quality and dimensional accuracy to meet the requirements,
blanking part thick and other characteristics.
2. Rational use of tungsten carbide. For the most likely to wear on
the parts need to analysis, if necessary, all the bottom and upper
of die should use tungsten carbide. In some cases, such as
structurally weak punch difficulty processing or fixed yet, you can
use a reasonable tool steel and cemented carbide used in
combination so that the mold manufacture and use must be the most
reasonable and economical.
3. Convex and concave mold structure. In the tungsten carbide die
processing conditions allowed, tungsten carbide mosaic structure
more economical, easy to process and easy repairs in the overall
structure of materials and processing .