Home > Cleaning Appliances >

Exported to USA High Efficiency Grit Removal System

Categories Grit removal system
Brand Name: LI
Model Number: GR-1830/6100
Certification: ISO9001:2008
Place of Origin: China
MOQ: 1 sets
Price: USD 5000-200002
Payment Terms: T/T or western union
Supply Ability: 1000 sets per season
Delivery Time: Within 35 days for 20GP
Packaging Details: Wooden box
Main Function: STP , ETP, WWTP Grit Removal By Vortex Stirring
Efficiency: separate Over 85% of those grit grain DN over 0.2mm
Feature: No Influence by Water Volume
incoming and output access channel angle: no less than 270°
HRT: 20-30 S
Hydraulic surface loading: 200 m3 per hour
Flow speed: 12-20 RPM
  • Product Details
  • Company Profile

Exported to USA High Efficiency Grit Removal System

Vortex Grit Removal System

LIGR Series Swirling Flow Grit Removal System

1. Applicant

It Is Mainly Used In The Swirling Grit Settling Pond Of The Urban Sewage Treatment Plant. This Equipment Uses Hydraulic Swirling To Effectively Separate the Mud Grit And Organic Matter. It Is Ideal Grit Removal Equipment.


2. Structure and Working Principle

The Swirling Grit Removal Pool adopts a cone-bottomed round pond with an Impeller Separator Installed in the Pond. After the sewage flows from the pond tangentially, it rotates 270 degree (clockwise as viewed from the top) and the sewage is discharged from the drainage channel by utilizing a certain flow rate of incoming water as power. It will make tangential movement along the inner wall of the circular Grit pool to form a swirling flow. At the same time, the liquid swirling and axial vortices are stirred by the paddles, thereby accelerating the sedimentation of the Grit particles in the sewage and effectively separating the organic matter from the Grit particles.


The smaller the central water flow section is, the faster the water flow speeds is, and the bottom water flow speed is increasing in the center. Move the Grit on the bottom of the pond to the central Grit bucket in a spiral trajectory. Organic matter rises in the center of the pond and the organic matter will be discharged together with the water flow. The bottom settling Grit is boosted by a lifting device, and then enters into the Grit separator for Grit-water separation, while the sewage returns to the Grid or Screen well.

3. Model Selection

LIGR-D-A or LIGR-D-P

LI Is Short of Loren Industry

D Means the Diameter of the Grit Sedimentation Pool;

Boosting Way Have Two Type

A means by Air Boosting

P means by Pump Boosting


4. Feature

1. The Grit Removal Effect Is Little Affected By Changes In Water Volume.

2. With Compact Structure,

3. Easy Operation and Maintenance

4. Long Service Life:

5. Two Optional Boosting Way: Air Lift Effect Is Relatively Good; While Pump Lift Cost Is Relatively Low;

6. Particle Removal Rate Above 0.2mm is Greater Than 85%;

7. Flow Below or Over 1080m / h, the Grit Sedimentation Pool body cans Adopts Steel and RCC Structure Respectively.

8. The System Uses PLC to Automatically Control the Grit Washing and Grit Discharging Cycle to Make Sure Its Safe and Reliable Operation

9. It Can Be Run Both Locally And Remotely As Per Requirement.


5. Parameter Data Sheet


ModelGR1830GR2130GR2430GR3050GR3650GR4870GR5480GR5800GR6100
Pool DN (MM)183021302430305036504870548058006100
Capacity (M3/H)180360720108019803170475063007200
Impeller SeparatorDN1000 mm1500 mm
Speed12-20 RPM12-20 RPM
Motor0.75 KW1.5 KW
Blower

Wind

Volume

(M3/min)

1.431.791.751.752.031.981.982.012.01

Pressure

(Kpa)

34.334.339.239.244.153.953.958.858.8

Power

(KW)

1.52.23.04.0
Pump

Volume

(M3/min)

253040

Head

(M)

2-3

Power

(KW)

2.23.04.0
Mounting DimensionWidth (mm)140014001550155017002200220025002500
Height (mm)300300400450580600630700750
Length (mm)110011001150135014501850185019601950
Working Bridge Load30 KN
Working Torque600 N.M.850 N.M.1190 N.M.

Comment:

  1. Hydraulic Surface Load: 200M3/M2H
  2. Hydraulic Retaining Time ( HRT) :20-30 Second
  3. Feeding Speed V: 0.15-0.90m/s under design Ratio (40-100%)
  4. Inlet and Outlet Channel clip Angle no less than 270 degree
Quality Exported to USA  High Efficiency Grit  Removal  System for sale
Send your message to this supplier
 
From:
To: Loren Industry Co.,Limited
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    More from this Supplier
    Contact Us Quickly