Commercial electric hoist system heavy AD durable long service time
The 1LG0 series of 3 phase asynchronous motors are Totally Enclosed
Fan Cooled (TEFC) with IP55 environmental protection. These motors
are designed and manufactured in accordance with ISO, IEC
standards, GB standards.
Terminal boxes are top-mounted as default on the motor. This box
can be rotated by 4 X 90º to allow for cable entry from each
direction. In addition, the terminal box can be installed either on
the Left Hand Side (LHS – code K10) or Right Hand Side (RHS – code
K09) when viewed from the drive end (DE) side of the motor.
Reliable quality and performance
To ensure reliable and long life, the 1LG0 windings are made of
materials with class F temperature rise limited to class B (80K)
Voltage and Frequency
1LG0 standard motor will operate on mains power supplies in
accordance with IEC 60034-1 Category A (combination of voltage
deviation ±5 % and frequency deviation ±2 %) for voltage and
frequency ﬂ uctuations.
1LG0 rated output power refers to continuous duty (S1) operation in
accordance with IEC 60034-1 when operated at 40ºC ambient
temperature and at site altitudes of 1000m or less.
1LG0 current overload is in accordance with IEC 60034-1 (1.5 times
for 2 minutes) when operated as per the rated name plate data.
Suitable for IP55 installations
Below or equal to1000m above sea level
Operating temperature between -20ºC and 40ºC