Home > Electrical Insulating Varnish >

RAL 7015 Grey Epoxy Powder Coat Paint Chemical Resistant For Motorcycle Frame

Categories Epoxy Powder Coating
Brand Name: PURDA
Model Number: RAL7015
Certification: ISO, SGS, Rohs
Place of Origin: CHINA
MOQ: Negotiable
Price: Negotiable
Payment Terms: L/C, T/T, Western Union
Supply Ability: 3000 tons per year
Delivery Time: 8-15 work days
Packaging Details: 20kg/carton
Color: Slate Grey
Material: epoxy polyester resin
Curing temperature: Low temperature
Advantage: Chemical resistance
Gloss: High gloss/semi gloss/matte
Usage: Pallet racks
  • Product Details
  • Company Profile

RAL 7015 Grey Epoxy Powder Coat Paint Chemical Resistant For Motorcycle Frame

RAL 7015 Grey easy coat tgic powder paint chemical resistant motorcycle frame epoxy powder coating


Main MaterialPolyester resin,barium sulfate,titanium dioxide
Surface TypeGloss,matte,wrinkle,sand grain,antique, Hammer,crocodile skin, wood effect,candy,chrome,transparent,semitransparent,metallic,and special pattern
Powder PropertiesSpecific gravity : 1.3 - 1.75 (depend on colors)
Average particle size : 35 - 45um
Coating PropertiesFilm thickness(ISO 2178) :60 - 90 μm
Coverage:15㎡ based on 60μm
Pencil hardness: ASTM D3363,H-2H
Adhesion :GB/T 9286-1998,0 grade
Bending test:GB/T 6742 ,=<2mm
Cupping test:GB/T 9753,>=7mm
Direct and reverse impact (ASTM D2794) : > 50kg.cm
Salt spray Resistance ( ASTM B117, 1000hrs)(Maximum undercutting ,1 mm ): No blistering or loss of adhesion
Heat and moisture test GB/T 1740,>=1000 hours,no change
Application ScheduleApplied by : Electrostatic spraying devices
Curing schedule :10 minutes at 200 ℃
AdvantageGood adhesion,anti-corrosion,UV resistant, strong coating film,
Accurate colors, good leveling
Shelf Life12 months

How to Powder Coat

Powder coating is a process of coating metal with a plastic finish applied in powder form and baked to a fluid state to bond it to the metal surface. Powder coating has many advantages over traditional liquid coating: It's better for the environment, applies thicker without running, and is easy to style with. Although certain aspects of powder coating can be tricky, it's certainly not difficult, especially for an enterprising soul. Proper cleaning and tools can be the difference between an amateur and a good powder coating job.

Determine the type of material you are going to powdercoat and then select a suitable powder for the finish. Powdercoating is done with thermoplastic or thermoset polymer powder, and these materials are formulated for bonding with different base metals to give the best results.[1]
  • See the next section for a detailed discussion of the differences between thermoset and thermoplastic coats. What's good for a car may not be good for a small trinket or decoration.
Disassemble all threaded or lubricated interfaces before you begin, including anything you don't want coated. It sounds simple, but many people forget this step. The powder coat you apply will adhere to everything (if properly done) on your rig, making sealed surfaces, bearings, clamps, bolts and nuts, etc. useless after blasting.[2]
Clean the base metal thoroughly.[3] Using bead or abrasive blasting on hard metal, such as cast iron or steel, will remove mill and rust scale, dirt and foreign materials. Chemical solvent cleaning will remove any grease, oil, or paint, and light sanding can be done to finish preparing the surface. Aluminum, magnesium, and other soft alloy metals can be solvent cleaned and wire brushed, or sanded if needed.
  • For example, you might sand-blast whatever you want to powder coat until it's down to bare metal. This is the first step in the process. If you don't have access to a sandblaster, you can also use a wire wheel, bench-grinder, or even sandpaper. Just as long as you get the material down to bare metal.
  • The next step is to strip the metal of any remaining grime or gunk. You can achieve this by soaking the item in acetone (if the item is small enough) or by wiping it with an acetone-soaked rag.
Apply the powder to the object to be powder coated. This is done using a "gun" or compressed air sprayer which electrostatically charges the powder material so that it sticks to the grounded base metal object receiving the coating.[4] These guns are available from various suppliers, and cost as little as $100. For experimental purposes, you can apply the powder to a flat metal surface by dusting it directly on, and spreading it to a thin, even layer.
  • Make sure you have your electrostatic charge hooked up to whatever part you are coating. The powder you use won't properly adhere unless it's given a charge to hold onto.
  • After applying the coat but before curing, be careful not to brush or blow on the powder coat, as this will cause some of the powder to fall off, leaving you with a less precise coat.
Cure the metal at a temperature appropriate for the powder material you use. A conventional oven is suitable for this purpose if the metal is small enough to fit, otherwise, an infrared heat lamp or other flame less heat source needs to be used. Normally, the object is heated to 350° to 375° F (175° to 190° C) for about 10 to 15 minutes, and allowed to cool.[5]
  • You can use a conventional oven to powder coat smaller items. Just be sure that you won't be using the oven to cook food after the powder coating. Once you've used an oven to powder coat, it absolutely should not be used for cooking.

Quality RAL 7015 Grey Epoxy Powder Coat Paint Chemical Resistant For Motorcycle Frame for sale
Send your message to this supplier
To: Nanjing Powder New Material Co., Ltd.
Characters Remaining: (0/3000)
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly