Home > Laser Marking Machines >

Multifunction UV Laser Marking Machine For Non - Metals And Metals Marking Engraving

Categories Laser Marking Machine
Model Number: QCU-3W
Certification: CE
MOQ: 1 set
Price: 6400--14000 USD
Payment Terms: Western Union, L/C, T/T
Supply Ability: 150 Set/Sets per Month
Packaging Details: Standard export wooden cases
Laser Type: Ultraviolet
product name: UV laser marking machine
Control software: Beijing EZCAD
Graphic Format Supported: AI, BMP, DST, DXF, DXP, PLT
Working area: 110*110mm,145*145mm,175*175mm,200*200mm,300*300mm
Cooling system: Air cooling
After-sales Service Provided: Online support, Free spare parts, Field installation, commissioning and training, Field maintenance and repair service, Video technical support
  • Product Details
  • Company Profile

Multifunction UV Laser Marking Machine For Non - Metals And Metals Marking Engraving

Multifunction UV laser marking machine For Non-metals And Metals Marking Engraving

Descriptions of Multifunction UV laser marking machine For Non-metals And Metals Marking Engraving :

Ultraviolet laser processing becomes cold processing because the high-energy molecules of ultraviolet photons directly separate the molecules on the metal or non-metal materials that need to be processed. However, this separation causes the molecules to be separated from the materials, and this way of working does not occur. Heat, because this does not produce heat, the way UV laser processing becomes cold processing, this is the source, and the difference from the traditional laser
1. Micron fineness
The QCU UV laser marking machine has a laser spot diameter of 3 mm, a small spot size, a small marking line width of ≤10 μm (micron), and a line fineness of up to micron, which can engrave a fine effect.
2. The heat affected zone is small
High-energy ultraviolet light with a wavelength of 355 nm directly breaks atomic or molecular chemical bonds on the surface of the material and "cold" the material. The heat production area is small, and the earth guarantees the processing quality.
3. The marking speed is fast
Vibrating mirror type precision marking head, marking effect is fine and can be repeated, marking character speed 300 characters / sec, line speed up to 7000mm / s.
4. The longevity
The common ultraviolet laser marking has high electro-optical light conversion rate, and the laser has a long life of 20,000 hours.
5. No maintenance
Under normal use, the whole machine will not change or add any consumables and consumables. The cost of later use is low. Sixth, good energy saving
6. The power of the whole machine is only 850 watts, one third of the common equipment. The annual electricity saving fee is several thousand yuan.
7. The powerful software
Marking software is compatible with CoreIDraw, CAD, Photoshop and other documents, supports PLT, PCX, DXF, BMP and other graphic file formats and barcode marking, can directly use SHX, TTF font, encoding, printing serial number, batch number, date, etc.

Applications of Multifunction UV laser marking machine For Non-metals And Metals Marking Engraving :

Because the focused laser spot is extremely small and the processing heat affected zone is small, the UV laser can be used for ultra-fine marking and special material marking, which is the first choice for customers who have higher requirements for marking. Ultraviolet laser is suitable for processing materials in addition to copper. Not only the beam quality is good, the focusing spot is smaller, and the ultra-fine marking can be realized; the application range is wider; the heat-affected area is extremely small, no thermal effect is generated, and the material scorch problem does not occur;

Multifunction UV laser marking machine For Non-metals And Metals Marking Engraving is widely used for marking the surface of packaging bottles (boxes) of food materials such as food, medicine, cosmetics, cables, pipes, etc., micro-hole (aperture D≤10μm) flexible PCB board, LCD, TFT marking, glass marking, Metal or non-metal plating such as dicing and cutting removes microvia and blind hole processing of silicon wafer. The focus is on computers, mobile phones, electronic products, electronic components, auto parts, daily hardware, medical equipment and other fields.

Technical Parameters of Multifunction UV laser marking machine For Non-metals And Metals Marking Engraving :

UV Laser Marking Machine
Average Output Power2.0~~10.0W@30kHz
Pulse Width<16ns@30kHz
Pulse Repetition Rate10-100kHz
Spatial ModeTEMoo
Beam Diameter2.0+/-0.2mm1m Measured at window
Beam Full Divergence Angle<0.5mrad
Beam Circularity>0.9
Pulse-to-Pulse Stability<3%RMS
Average Power Stability<5%RMS/8hr
Beam-Pointing Drift<25µrad/℃
Polarization Ratio>100:1
Polarization OrientationHorizontal
Operating Temp. & RH10 to 35

Storage Temp. & RH-20 to 65


Electricity Requirement

Power Consumption

Single phase

Configurations and main parts of Multifunction UV laser marking machine For Non-metals And Metals Marking Engraving :

QCU UV laser marking machines
Standard configurationsChinese brand UV generator
INNGU LaserRFH LaserHuaray Laser









♯Marking area: 110*110mm

♯Laser type: UV 355nm

♯UV laser generator

♯Industrial computer and software installed.

♯Aluminum alloy flat working table.

♯Red pointor for laser beam.

♯Red pointor for focus height.

♯Air-cooling for cabinet.

♯Sino-GalvoGalvanometer scanner

♯Opex imported Field lens

♯Manual lifting column 500mm

♯With tool kit

♯36 months warranty



1. The generators are water-cooling if not specified above.

2. The machines comes with water chiller and industrial computer and software installed.

Our service of Multifunction UV laser marking machine For Non-metals And Metals Marking Engraving :

1. The company who initially provide 3 years warranty in the world,

2. 24-hour full after sales service.

3. All finished machine we delivered are 100% strictly tested by our QC department and engineering department.

4. OEM Service Customized and OEM orders are welcome due to our abundant experiences. All the OEM services are free.

About us

Q1: How about warranty?

A1: 36-months quality guaranty, the machine with main parts(excluding the consumables) shall be changed free of charge when if any problem during the warranty period.After 36-months warranty, we ll offer all the parts with the agent price.

We offer technical supports, afterservice person in charge :Skype / whatsapp/ Wechat/ Tel: +8613176441785 Carol zhu.

Q2: How to operate and set up parameters of the machine?


1. The operation manual and video will be sent to you with your machine, and we ll make complete step by step operating videos with your machine when delivery.

2. If you still can not operate it by watching the video, we ll show you via skype / teamviewer / wechat, and most of our customers can operate the machine well within 3 days.

3. We ll install the controlling system EZCAD and adjust all parameters well in EZCAD on your computer when we make your operating video when delivery , so when you receive the machine, you can work at once.

3. Different markers have different parameters, and even different field lens on same machine ll have different parameters, we save the corresponding parameters (screenshots) on the desktop of your computer. If you do not order computer from us, we ll send the installing software EZCAD and your parameters on Udisk with your machine.

Q3: What is the software system?


1. Our QCU machines can support common types of image files (bmp, jpg, jpeg, gif, tga, png, tif…) and vector files(ai, dxf, dst, plt…).

2. You can make simple images in our controlling system EZCAD, because EZCAD itself has very humanized drawing tools bar such as node, curve, line, rectangle,circle, ellipse, polygon, text,barcode and other common commands.

3. If you need more complicated images to mark, you need to use professional graphic design software, such as AI, Photoshop, CORELDRAW, CAD , and get the files with the formats we listed in NO1, imput the files into EZCAD,then you can choose different hatch / marking tpye and marking power ,speed to mark, and your marking ll be finished.

Q4: Is this machine has quickly-wear part?

Our QCU machines has lifetime more than 100,000 hours, just keep the better working enviroment.There is no any part need to change except the part will be broken down.

Q5: I don’t know which one is suitable for me ?

A5: Please tell me your

1. Max work size: choose most suitable model.

2. Materials and marking effects: choose most suitable power.

Q6: Delivery time

A5: General configuration:7 days. Customized:7-10 working days.

Quality Multifunction UV Laser Marking Machine For Non - Metals And Metals Marking Engraving for sale
Send your message to this supplier
Characters Remaining: (0/3000)
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly