High Visosity Chemical Plastic Plasticizer Fast Moving For Chemical
DOP is a a good main plasticizer of PVC plastics. Compared to
iso-octyl phthalate ester (DOP), it offer better heat ,
anti-freezing, not volatile, anti-taking and flexibility. Thus, it
shows excellent durability, resistance to soapy water, and
low-temperature softness. Because of low volatility, can be used to
produce wire and cable working in low temperature, and is widely
used in 70 ° C -resisting cable (Standards of International
Electrotechnical Commission) and other soft PVC products. Besides,
it also can be used in leatherette and film.With good
compatibility, it also can be used as plasticizer of PE alcohol
butyral, acrylonitrile-butadiene rubber, cellulose nitrate and
synthetic rubber. It also can be used as coating
additives,lubricant of precision instruments, lubricant additives,
or softener of paper.
1) High plasticizing efficiency and fusion rate
2) Good low volatility, Uv-resisting, cold-resisting property
3) Excellent softness
|Appearance||transparent oily liquid|
|Acid value mgKOH≤||0.3|
|Flash point open≥||190|
|Relative Density 20℃||0.926|
|Loss on heat 125℃, 3h≤||0.001|
Emergency overview - Avoid contact with skin, eyes and clothing -
Avoid breathing vapor or mist - Washing thoroughly after handling -
Use only with suitably ventilation - Avoid contact with strong
oxidizers, excessive heat, sparks or open flame.
Hazardous decomposition products - Thermal decomposition may
release toxic and hazardous gases Fire and explosion hazard -
Slightly fire hazard when exposed to heat or flame and larger fires
use water spray fog or regular foam.
Stability and reactivity - Stable under normal temperature and
The product meets GB/T 5761-2006 standard with its physical and
chemical properties meeting requirement in table below:
1. The user can choose any one from vifscosity number, K value
,index of average polymerizapion degree.
2. The user can confer with the manufacture if they have other
index ,requirement ,on thermal stability.