Waterproof Wood Texture Luxury Vinyl Floor Wide Plank interlocking
floor tiles kitchen
Stone plastics composite (SPC) is a new type of
environment-friendly floor developed on the basis of high
technology. It has the characteristics of zero formaldehyde,
mildew, moisture-proof, fire-proof, insect-proof and simple
installation. SPC flooring does not need glue. They do not contain
heavy metals, phthalates, methanol, and other harmful substances.
With its excellent stability and durability, the stone-plastic
floor not only solves the problem of damp deformation and mildew of
solid wood floor, but also solves the problem of formaldehyde of
other decoration materials. It has many patterns to choose from and
is suitable for indoor furniture, hotels, hospitals, shopping
malls, and other public places.
|Name||Vinyl flooring (PVC flooring, SPC indoor flooring)|
|Color||Show in the chart or upon your sample|
|Size||184*1220mm or 151*920mm or Customized|
|Overall thickness||3.2mm, 3.5mm, 4.0mm, 4.5mm, 5.0mm|
|Wear layer thickness||0.3mm or 0.5mm|
|Surface texture||Wood embossed, Deep wood embossed, hand scraped, impact grain,
|Paving method||Click system, dry back|
|Service||A strict quality control system, one to one order following service|
1) 100% waterproof of SPC flooring
SPC flooring is 100% waterproof, which you can install on every
room in your home.
2) Anti-Scratch of SPC flooring
SPC flooring uses the new technology UV paint, which contains
3) Tain Resistance of SPC flooring
The surface of EPL SPC flooring is covered by PE wear layer, and
specially treated with a special and double-layer UV coating. The
UV paint is top and special technology in China, which is stain
4) Anti Cigarette of SPC flooring
The new technology UV coating will protect the surface, the high
temperature of burning cigarette get no influence on the UV
coating, and also no destroy of the surface of SPC flooring.
(1). Waterproof and moisture-proof. The problem that wood products
are easy to rot, expand and deform after absorbing water in wet and
multi-water environments is solved. It can be used in environments
where traditional wood products can not be applied.
(2). Insect control and termite control, effectively eliminating
insect harassment and prolonging service life;
(3). There are many colors to choose from. It not only has natural
wood texture and wood texture, but also can customize the color
according to its own personality.
(4). High fire resistance. Effective flame retardant, fire
protection level up to B1, self-extinguishing in case of fire,
without producing any toxic gases;
(5). It has good machinability and can be ordered, planed, sawed,
drilled and painted.
1. Check you have enough floor products to complete your flooring
allowing for 10% wastage for cutting etc. This also should allow
for some spare after project completion for any future repairs.
2. Check your subfloor before installation-it must be dry and clean
before laying any boards. Check that the surface is flat, meaning
within 3mm over a 3-meter span. If you have greater variation than
this, then a self-leveling compound can be used.
3. To provide the best color blend, please ensure you open and
install from 3-4 boxes at a time.
4. Any greater spans than 10 meters in one direction must be broken
up by an expansion joint. An expansion joint should be 6-10mm and
can be finished with a T profile trim.
5. The floor can be installed over underfloor heating. Please
ensure the heating is evenly distributed and the floor temperature
must not exceed 30°C.
6. Normally the floor will not require acclimatization. The
exception is if it has been in extreme storage either below 10C or
over 40C. If this has been the case, acclimatize for 24+ hours in
the project location.
7. The floor is a water-proof material, but that does not mean that
water can not pass through joints, etc. So, therefore, the subfloor
must not have a moisture content any greater than 2.5% according to
CM testing method. If any leak or flood does occur, the floor
should be uplifted to allow the area to fully dry. The floor is not
designed to be used in any exterior situation.
8. The floor is designed to be installed as a floating floor and an
allowance of 6mm minimum must be allowed around the edge of the
room. Always run underneath kitchen cabinet kickboards. Note that
if the room gets significant sun, allow minimum 10mm around edge.
9. Always try to lay the floor in the linear direction of the sun
or main light source.
10.If you need to disassemble your floor, separate by lifting a
whole row together at an angle. Then once separated lay them flat
and slide them apart.
Q: How about the payment?
A: we accept TT,LC,west union,paypal,usually 30% deposit,balance
Q: Do I need professional Woodworking for the installation?
A: Indeed our products are very easy to install, do not need much
experience about it, you can DIY the installation by yourself.
Q: Do I need to rest the house for a year after the construction.
A: No, our products are eco-friendly, No pollution, no noise, No
formaldehyde, benzene, no harmful gases, you can live in your new
house right after the finish.
Q: When can you ship the goods after the order?
A: The new products can be finished and ship out around 20-30 days,
and we will check and reply to you the best shipping time soon
after your request.
For more question, sent us an email or inquiry, thanks.