Home > Paper Processing Machinery >

5-15 Strips High Linear Speed Stainless Steel Slitting Machine Heavy Load Long Durability

Categories Stainless Steel Slitting Machine
Brand Name: RISHBIN
Model Number: RS0.2-1.8
Certification: CE
Place of Origin: Wuxi, China
MOQ: 1 PCS
Price: Negotiable
Payment Terms: L/C, T/T, Western Union
Packaging Details: Cartoon
Strip Width: ≥15mm
Coil Thickness: 0.2~1.8mm
Product Name: Stainless Steel Slitting Machine
Slitting Accuracy: ±0.1mm
Number of Strip: 5-15
Blade shaft: Ф220mm
  • Product Details
  • Company Profile

5-15 Strips High Linear Speed Stainless Steel Slitting Machine Heavy Load Long Durability


5-15 Strips High Linear Speed Slitting Machine Heavy Load Long Durability


  • The tension pad uses high elastics and resistive carpet as surface materials, so keep the outputs of the Line smoother. In addition, it also equipped a pressure-balance device to keep an even-pressure over the both side of materials that toched with the tightener.
  • The recoiler is equipped with an improved / high rigid holder, that causes reduce of lead time a hydraulic pressure adjustable back - pressure device is equipped on the separator mechanism, so that a constant hold pressure could be reached for rec oil.
  • Self-tension design enables to retain a better tightness during rec oil.

Stainless Steel Slitting Machine​ introduction

We always choose good suppliers of hydraulic parts, motors, speed reducers, electric parts. As well, we like to purchase those parts according to customer requirements for special metal coil slitter.


In the beginning, the coil is loaded on the coil car by crane and brought to the uncoiler by operating the coil car. Coil car centralizes the coil with the uncoiler mandrel and the coil is mounted on the uncoiler. Mandrel is expanded. Snubber roll rotates the coil. Peeler breaks the straps and brings the pre end upto Pinch roll. The Pinch roll drives the coil end upto the slitter. Then its drive is disconnected. Slitter moves the slitted strips further. Slitted strips are threaded through loop table and drag tensioner into the recoiler drum. Recoiler winds one turn on loose coil.
Then drag tensioner and loop are put into operation. Slitter and recoiler run simultaneously in synchronization. As the coil build up, the recoiler rpm correspondingly goes down to keep desired constant line speed. This process goes on until the end of coil on uncoiler. The slitted coil is pushed on the exit coil car through a pusher plate operated by hydraulic cylinder. The side slitted scrap is wound on the scrap winder units provided on both sides of the slitter.

Matters needing attention in production
1. Be careful not to touch the coil when feeding.
2. Manually adjust the coils on the uncoiler. Normally, the coil must be aligned to ensure that the width of the two cut edges is as consistent as possible. In special cases, when there is a large crack or other defect on the side of the material, the width of the two cutting edge is not consistent, but the horizontal position of the coil on the uncoiler must be adjusted manually, and it is confirmed that the edge defect of the blank can be completely removed.
3. Check the thickness and width of incoming material before production can be carried out.
4. When the material coil with a thickness of more than 0.5mm is removed from the steel belt, the roller must be used to prevent the coil from being thrown.
5. The material should be positive when wearing, and the material should not be crooked or wrinkled. It is strictly prohibited to wipe the rollers at the entrance to avoid getting involved.
6. In the process of cutting slitting machine steel , when marks and scratches caused by the machine are found on the surface of the plate, the guide rollers on the guide road should be stopped and checked timely. If any prominent particles are found, they should be polished with sandpaper and then cleaned with alcohol.
7. Pay close attention to the surface quality of incoming materials during the operation of the machine. According to the requirements of the quality and acceptance standard of steel slitting linemachine, if it is found to be unqualified, it must stop the machine and find relevant technical quality personnel to deal with it.
8. Before each roll of material is produced, a sheet of material should be cut, and the production can be carried out in accordance with the technological requirements of the length and width on the card. If not, it is necessary to adjust the parameters of scissors, otherwise it is not allowed to continue production.
9. When lifting the finished products, it is necessary to carefully inspect the crane and rigging, and command and operate overhead travelling cranes to concentrate. Operators are prohibited from standing in small and unsafe places to prevent material from swinging.
10. In case of equipment failure in production, stop immediately and inform the maintenance staff to deal with it.

RISHBIN, one of the best steel slitting machine manufacturers with the high-quality steel slitting lines for sale, was founded in 1999. With almost twenty years development, it has become a leading steel slitting company in this field and exports its quality slitting machine for steel and other materials to the world. RISHBIN is dedicated to providing quality services and quality products.

Stainless Steel Slitting Machine Parameter

Model No.RS0.2-1.8RS0.3-3.0RS0.8-4.0
Coil MaterialCR Coils , HR Coils, S.S Steel Coils, GI Coils ,AL Coils, Copper Coils Picking Oil Coils
Coil Thickness0.2~1.8mm0.3~3.0mm0.8~4.0mm
Line Speed0~150/300m/min0~150/300m/min0-120/200m/min
Coil Weight≤10T(15T)≤20T(25T)≤25T(30T)
Coil I.Dφ508mmφ508mmφ508,φ610,φ760mm
Coil O.D≤φ1600mm≤φ2000mm≤φ2000mm
Strip Width≥15mm≥25mm≥25mm
Number of Strip5~158~205~15
Slitting Accuracy±0.1mm±0.15mm±0.25mm
Blade shaftФ220mmФ240mmФ240mm
Electrical Control SystemPLC Automatic controlPLC Automatic controlPLC Automatic control

Quality 5-15 Strips High Linear Speed Stainless Steel Slitting Machine Heavy Load Long Durability for sale
Send your message to this supplier
 
From:
To: RISHBIN CO., LTD
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly