Basic information of PHE plate
Each plate contains two parts
Metal plate:It is an important heat transfer element for pressing
metal sheet with corrugation, sealing groove and corner hole.
Corrugated not only can strengthen heat transfer, and can increase
the sheet and rigid, so as to improve the bearing capacity of the
plate heat exchanger, and because turbulence prompted the liquid
state, so it can reduce the formation of sediment or dirt, play a
role in "self-cleaning".
Sealing gasket: installed in the slots along the perimeter of the
plate of the gasket and seal plate between the peripheral, prevent
fluid leak outward, and according to the requirements of design,
the sealing part of the Angle of hole, the cold and hot liquids
according to their respective port flow.
The corrugated plate is pasted with sealing gasket, which is
designed to double seal structure and has signal hole.When the
medium leaks from the first seal, it can leak out from the signal
hole, and the problem can be detected and solved as soon as
possible, without causing the mixing of the two media.Sealing
gasket according to different media and operating temperature to
choose different types of rubber.
- Brand Name: M&C
- Material: Stainless Steel 316L, Stainless Steel 304, Titanium
- Advantage: Produce plastic deformation and have certain strength
- Dimension: 1415*496mm
- Center of hole distance: 1238*310mm
- Corrugation deep: 3mm
1. Advanced plate design to improve heat transfer efficiency.
2. Uniform distribution of fluid, accurate positioning.
3. Common types of plate heat exchanger plates at home and abroad.
4. Reasonable shunt area, enhance corrosion resistance, improve the
utilization rate of heat exchange area.
5. The reverse flow of the two fluids greatly improves the heat
6. Parallel piping of the same fluid inlet and outlet simplifies
7. Single plate, simplified maintenance.
|Plate Material||Available Medium|
|AISI304, AISI316L||Pure Water, Fresh Water, Mineral Water|
|Titanium||Sea Water, Mineral Oil, Vegetable Water|
|254SMO||Dulute Sulphuric Acid etc.|
|Ni||Caustic Soda with high temperature and concentraction|
|Hastelloy||Concentration Sulphuric Acid etc.|
M&C has different kinds of type for PHE plate,such as Alfa-
and so on.
Application:HAVC, Powerplant, Food, Marine, Refinery, Pharmace,
Mining, Chemical, Refrigeration
M&C, is the Booster and leader of effective heat exchange
technology in all industries.
M&C can be able to offer a full range of heat exchange design
calculation in full working condition. We have accumulated rich
experience in heating, cooling and waste heat recovery for complex
process mediums. M&C never views separately in the selection of
heat exchange equipment applications, but put it in the whole
process production line, Therefore, we find the best balance to
consider the whole initial investment in equipment and long-term
operating costs. We optimize manufacturing processes of our clients
and reduce the use of fresh energy to provide our customers maximum
value when we find reasonable main points in high heat transfer
efficiency and pressure loss.
M&C enterprises, has always been insisting this operation
principle: Opening-up and cooperation, mutual improvement with
cooperative partner and growing together with employees from the
date of birth, to promote the progress of industry and business.
The leading heat transfer technology of M&C, always from in the
forefront of the heat exchange field all over the world, it is our
belief that common sense is not constrained by experience, having
the courage to take risks and depending on the talent as the most
Why Choose us ?
We seek an understanding of the working conditions for you, and
carries on the effective communication with your engineer, to make
a perfect solution.It will be more accurate, reducing purchase cost
and energy consumption (water, electricity and gas).
Our technical engineers can according to user's working conditions,
for our customers to provide professional selection plan and
and we will choose the appropriate solutions, to provide a stable,
efficient service for you.
We will give more consideration to customers' working conditions in
order to reduce their equipment purchasing cost and energy
consumption of processing operations (water, electricity and gas)