MVR Mechanical Vapor Recompression For Milk , Glucose , Organic
Mechanical Vapor Recompression
MVR is the abbreviation of Mechanical Vapor Recompression. It takes
use of the compressor to re-compress the second vapor (low
temperature and low pressure) which is evaporated from the liquid
material, to rise its temperature and pressure, so as to reuse it
as heating source to evaporate the liquid material again. During
the evaporation of normal multi effect evaporator, the second vapor
of one effect could not be used as the heating source of its own
effect, can only be used for the other effect. If want to use for
its own effect, must provide extra energy to increase its
temperature(pressure), and the steam jet pump can only compress
part second vapor, while MVR Evaporator can compress all the second
vapor inside the evaporator.
The evaporation process of MVR is low temperature steam compressed
by compressor, temperature and pressure increase, increase in
enthalpy, and then enters the heat exchanger in order to take full
advantage of the latent heat of steam. Apart from the drive
started, the entire evaporation no need steam. MVR evaporator from
Chengdong Medicine Machine adopts digital intelligent automatic
control production, automatic control system uses high reliability
of the Germany Siemens equipment. Use high efficient and high
quality compressor to improve the heating efficiency, it is
energy-saving at the same time the production efficiency goes
beyond traditional concentration equipment.
It can be widely used to Milk, glucose, organic acid, VC, xylose,
pharmaceutical, plant, chemical industry, environmental protection,
waste recycling, paper making, salt making industry such as
evaporation and concentration, evaporation crystallization, low
temperature of evaporation process etc.
MVR has more advantages, such as energy saving, high thermal
efficiency, low power consumption, no pollution, equipment stable
operation, simple operation, high automation and equipment in
compact, covers an small area space, and save the cooling system.
Especially applies to the factory who want to expand the steam and
water supply but space is insufficient, and need chilled water and
condensation water for low temperature evaporation situation, can
save investment and gain good energy saving effect. It is a key
recommendation national science and technology projects.