Home > Glass Product Making Machinery >

Double Door 51L Walk-in Chamber / Temprature And Humidity Chamber With Lighting Device

Categories Walk-in Chamber
Brand Name: KOMEG
Model Number: KMHW-51R
Certification: CE approval
Place of Origin: China
MOQ: 1Set
Price: Negotiation
Payment Terms: L/C, T/T, Western Union
Supply Ability: 1, 000~1, 500 SETS / YEAR
Delivery Time: 35 working days after received 60% deposit
Packaging Details: Packed in carton firstly, and then reinforced with plywood case for outer packing
Temp Range: +15℃ ~ +50℃
Temp. Deviation: ±2.0℃
Humidity range: 30~95%RH
Humidity Deviation: ±3.0%RH(>75%RH)
Load: 316Ib steel, heat 3KW
Interior size: W 4600 × H 2590 × D 4300 mm
  • Product Details
  • Company Profile

Double Door 51L Walk-in Chamber / Temprature And Humidity Chamber With Lighting Device

Double door 51L walk-in temprature and humidity chamber with lighting device


A KOMEG Walk-In Chamber serves as a test site for large components, assemblies, and finished


products in electrical and electronics, aerospace, batteries and automobiles, etc. KOMEG manufactures


both Static Walk-In Chambers and Dynamic Walk-In Chambers and can be configured as a temperature


chamber or a temperature humidity chamber.


The KMHW-Series walk-in temperature and climate test chambers are especially developed for large test


specimens. Size and design are optimal loading of test specimens. The modular construction and


variability in size and equipment is ideally for specific application.

.


Features


● GB-2423.1-2008 (IEC68-2-1) Test A: Low Temperature Test


● GB-2423.2-2008 (IEC68-2-2) Test B: High Temperature Test


● GJB360. 8-87(MIL-STD. 202F) High Temperature Life Test


● GBJl50. 3(MIL-STD-810D) High Temperature Test


● GJBl50. 4(MIL-STD-810D) Low Temperature Test


● GB2423. 3-93(IEC68-2-3)Test Ca: Constant Heat Test


● GB2423. 4-93(IEC68-2—30)Test Db: Damp Heat Alternative Test


● GJBl50. 9-93(MIL-STD-810D) Damp Heat Test


Specifications

1, Temperature
1.1 Temp. Range+7℃ ~ +48℃
1.2Temp. Deviation±2.0℃
1.3Temp. Fluctuation±0.3℃
1.4Temp. Uniformity≦2.0℃
1.5Heating time+7℃ to +48℃ about 30min no load
1.6Cooling time+20℃ to +7℃ about 60min no load
2, Humidity
2.1Humidity range30~95%RH
2.2Temp.and humidity range


2.3Humidity Deviation

±3.0%RH(>75%RH)

±5.0%RH(≤75%RH)

2.4Humidity Uniformity±3.0%RH(no load)
2.5Humidity Fluctuation±2.0%RH
3.Load316Ib steel, heat 3KW
Temperature and humidity performance measurement comply with related regulation of IEC60068-3-5 standard; Sensors placed in the air outlet.
. Body Structure ( Field installation )
1. Chamber size

Interior size: W 4600 × H 2590 × D 4300 mm

External Size: W 6050 × H 3090 × D 4500 mm (Does not contain the machine protruding part)

2.Insulation Chamber

External material : High-quality carbon steel plate, the surface for electrostatic color spray treatment ;Interior material :SUS304# stainless steel;

Insulation material :100mm rigid polyurethane foam + Glass fiber.

3. DoorDouble door, W(1200+1200)*H2500 mm, window W460*H560mm
4. Lighting DeviceMoisture-proof incandescent lamp *12.
5.Power distribution control cabinetTotal power circuit breaker, over-temperature protection.
6.Pressure Equalizations
Port
Test chamber with one pressure equalization port, ensuring the inside and
outside pressure balance.
7.Control methodForced circulation ventilation, balance thermostat (BTHC).
8. HeatingHigh-quality nickel-chromium alloy wire heater, non-contact control mode (SSR).
9. HumidificationStainless steel corrosion-resistant electric evaporative humidification.
10.Pure water machinePure water machine *1 , Please provide with 1 ~ 2kg / cm2 tap water..
11.Humidity SensorElectronic humidity sensor , No need to replace the damp cloth.
12. Threading holeOpen a φ100mm hole in the left side of the chamber, also equipped with rubber isolation plug and plastic cover.
13.Condensate outletEquipped with studio condensate and unit condensate drain holes.
14. Wind speedEntire chamber wind speed ≦50ft/min.

Product details



Packaging:


Chambers are covered with air bubble film before put them into the strong plywoodcase, which not only


has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic,


odorless, moisture corrosion, crash-proof, etc



After-sales Service and Training


Charge-free warranty will last for 1 year from the date of equipment acceptance. After the warranty


period, the user will be charged properly. Irregular examination and life-long service are available;


Note: If needed, provide 2 operators for on-site installation and training


Company introduction:


Since 1990, manufacturers of custom environmental chambers and standard environmental chambers,


Specializing in environmental simulation equipment, ess, walk-in, environmental stress screening, altitude


chambers, temperature chambers, temperature and humidity chambers, environmental test chamber


manufacturers, humidity chambers, humidity simulation, temperature cycling, thermal test chambers, solar


panel test chambers, thermal shock, climatic/climate chambers, vibration test chambers, drive-in


chambers, laboratory test chambers, environment test rooms.

Quality Double Door 51L Walk-in  Chamber / Temprature And Humidity Chamber With Lighting Device for sale
Send your message to this supplier
 
From:
To: KOMEG Technology Ind Co., Limited
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly