3KW Submersible Water Pump / High Rotating Speed Sanitary Drum Pump
Submersible Water Pump Standard design
The GKH sanitary centrifugal pump is composed of motor, pump shaft,
mechanical clamping jacket, sanitary mechanical seal, connection
support, rear plate cover, impeller, pump shell, etc. The GKH
sanitary centrifugal pump has large internal round chamfer and
cleaning type seal. The GKH sanitary centrifugal pump
speciallydesigned for CIP has the stainless steel protection cover
used for protecting the motor, and the equipment is supported by
four adjustable feet.
Submersible Water Pump Motor
1. The motor conforms to the following standards GB 755-87
Q/JBQS 28-20003. Excellent electric performance Low noise, low
vibration Protection grade of high performance The standard
protection grade of the motor is designed as lp54, IP55
According to user requirements, higher protection grade can be
Suitable for use with double frequency and wide voltage.
In sanitary technological system, the pump is running continuously
and providing flowing power for liquid. This challenges the
performances of the pump. To reduce risk, the pump shall be
elaborately designed so as to solve complex problems.
This is the reason why GOBOR Company is doing its best to make the
performances match the intended usage.
GOBOR Company is one of the few professional manufacturers in China
that provide centrifugal pumps, sanitary pumps, self-priming pumps,
circulating pumps, dairy pumps, food pumps, milk pumps, plate type
heat exchangers and etc. But more importantly, we are the
professional manufacturer in pump industry, and we have
richprofessional knowledge, including pump engineering
technologies, pump sealing technologies and pump innovative
Our product combination ensures the highest sanitary standard, the
requirements for no-fault operation and low maintenance.
The GKH sanitary centrifugal pump is provided with a set of
externally mounted single end mechanical seal or water injection
mechanical seal. The static ring of the mechanical seal is made
ofstainless seal, silicon carbide or tungsten alloy. The dynamic
ring is made of stainless seal, carbon, graphite or tungsten alloy.
The seal ring of the water injection type seal is a durable lip
seal. The series of pump products can also be equipped with the
double end mechanical seal.
Sanitary Centrifugal Pump Technical parameters
Maximum inlet pressure:0.5MPa Temperature range:-10℃+140℃(EPDM)
Noise level(at 1m):60-85dB(A)
Washable seal Hydraulic pressure: maximum 0.1MPa Water
volume:0.25-0.5L/min Double end seal Hydraulic pressuremaximum
0.1MPa Water volume:0.25-0.5L/min
GKH technical data (3KW)
|115 |290 |179|267 |53 |150/215|100|206 | 290/345 |
Medium:20℃ clean water
Materials of liquid passing parts:AISI316L or AISI304 stainless
steel Materials of other parts:AISI304 stainless steel Outer
surface:titanium Inner surface:miror polishing 9.4 or titanium
Liquid passing rubber seal materialEPDM FRMNBR