Powder Coated Expanded Metal Mesh Ceiling Panels For Buildings
General Production Information
Ares's Expanded metal ceiling have various size,pattern,and
color.It is made by cutted and stretched to form a metal mesh-like
material. The strands and knuckles are set at an uniform angle to
the plane of the sheet. This adds strength and rigidity and
distributes the load to the supporting frames.
As there are big open area, it reducesed the weight of the
ceiling,another side, as metal ceiling, it has the same advantages
inside a building as on the outside from fire resistance to variety
in finished, it is easy to clean,it helps defray utility costs
through more efficient heating and cooling.Expanded metal mesh are
also available to help absorb or redirect sound.
Expanded metal mesh ceiling can be coated with any color you like
and can be made by different materails, brass, aluminum, and
chrome. It can be designed to different shapes to provide a
different aesthetic appearance.
|Size||600 mm × 1200 mm|
|700 mm × 1400 mm|
Powder coating is a dry finishing process in which free-flowing,
thermoplastic or thermoset powder material, rather than a liquid
suspension, is applied to a surface, melted, and then allowed to
dry and harden into a protective coating. Typically, the powder is
applied via electrostatic spray deposition (ESD) to an electrically
grounded metal substrate. Once the powder coating is completely
applied to a part, it is then heat cured in an oven until the
powder melts and flows together. Powder coatings can also be
applied by dipping preheated parts into powder material within a
fluidized bed. The powder melts and fuses with the part’s heated
surface upon contact. In either case, as the part dries and cools,
the cured powder forms a smooth, hard finish.
Expect for the above specification, Ares metal relaying on our
years of operating experience, and advanced equipment, can offer
custom service, for example punching the holes to different size,
different orientation way according to customer's requirment with
Expanded Metal Mesh Ceiling Accessory:
Expanded Metal U-Edging is an expanded metal product accessory. it
is a metal U-shaped L-shaped or square pipe strip attached to the
edge of an expanded metal product to make the edges more attractive
and uniform. It provides a safety barrier at the cut edge of the
sheet covering sharp cut edges, it is available in carbon
steel,stainless steel, aluminum and galvanized sheet.
- Fast & Easy installation
- Available for exterior applications
- No special tools required for installation clips
- Washable,scrubbable,mold & mildew resistant
- Custom lengths available
- Aluminum trim available
- Can be used on verticl wall applications
- We have the capability to customize any size or mesh style to meet
your specific needs.
- We have a mature R&D team to upgrade our technology.
- We have 33 years of production management experience, and a
complete manufacturing chain.
- Our custom fabrication capabilities include cutting, shearing,
cut-outs, welding, punching, drilling, slitting and burning.