UV Curing Machine Used To UV ink , UV Adhesives , Plastic , Glass ,
Flat UV Curing Machine is used for flat surfaces UV curing, which
is mainly for drying solid process and flat surface UV ink drying
solid process, such as various of UV ink, UV adhesives, UV paint
curing, plastic, glass, hardware.
1. With the high efficiency UV light, it can finish the UV curing
quickly, the high level of UV light can be adjusted, and setting
the right parameters for UV curing.
2. LED display shows the conveyor running speed, convenient to
3. The machine body adopts the extra-thick stainless steel for
hardness and durable.
4. UV lamp and transformers which are imported make it fit for
special ventilation design, which can be max effectiveness.
5. It suits for different UV curing process. This series of
products is different with the traditional high-power, high-power
6. In order reduce the cost and improve output for our customer.
1, Machine length: 2000mm
2, UV working area: 1200mm
3, Feed operation area:400mm
4, Discharge area:400mm
5,Entrance height: 100-150mm can be adjustable
6,Entrance width: 500mm
7,Conveyor belt distance to floor:750±50mm
Machine Electric parts:
1,General Power :7.0 kw 5.0A
2,Belt speed range: 0-10m/min
3,Motor power: 800w
4,Speed controller: 500W
5,Exhaust fan: CY-125
6,Ampere Meter :50A
8,Machine voltage: 220v 220V±5% 50Hz
1,Ultraviolet (uv) radiation dry solid light source, to ensure that
the dry solid effect
2,UV lamp light length: 560mm, total length 800mm, light power: 2KW
-3KW( it can be adjustable)
3,UV source wavelength 350μm to make sure the curing effect.
4,UV lamp 1pc, 3KW
1,Over voltage and over current protection
UV Curing machine configuration list:
|1||Out material||Cold plate baked||China||1.2MM thickness|
zinc-coated steel sheet
|7||Exhaust fan||Manda||China||1 set|