Power Switch Control Dry Mix Mortar Plant Dust Proof With Screw Conveyor

10T per hour capacity dry mortar production line cement mortar machine dry mortar plant

Product Introduction

I. Additionally equipped with secondary screw conveying system, finished product storage silo, automatic packing machine based on multi spiral ribbon mixer, to composed an efficient and reasonable simple dry powder mortar mixer with low cost.

II. Occupation Area<20m2, Height <3.5m, its capacity at 25-30t per day, just only need 2-3 person,very easy to operate.

III. Dry mortar production machinery is mainly composed of dry mortar mixer, feed screw conveyor, three ribbon mixing machine, secondary hoist, a storage hopper and automatic packing machine, etc..

This system is an efficiency production system after multiple times improvement on the basis of multiple ribbons dry mortar mixer. Mixed product will be into a storage bin through second lift machine. Then worker can carry out filing operation and not affect the next production. Matching an accurate packing machine can greatly improve production efficiency.

BH automatic dry mortar mixing production line aslo called dry mortar plant, dry mortar mixing machine, dry mortar mixing equipment. Which can feedvarious materials into the bin, under the automatic control system, this production line can realize automation in collecting, feeding, filling and packing. It is the ideal selection for set up a dry mortar factory with reasonable price and quick refund.

Main configuration
Electric control cabinet; Sand dryer; Weighing system; Feeding hopper; Impulse dust collector; Bucket elevator; Twin shaft agravic mixer; Finished product holding tank; Automatic packaging machine; Air compresser.

Raw material of dry powder mortar production line:

1. Cementing material: cement, lime, plaster.

2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc.

3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.

4. Water-retention and thickening material.

5. Chemical additives.

Automatic dry mortar mixing production line can produce following dry mortar
Putty powder, Tile adhesives,tile glue, Thin set coating, Masonry mortar, Plaster mortar, Screed mortar,Bonding mortar,AAC jointing mortar, dry sand mixture, Insulation mortar, Decoration mortar

The automatic PLC control system administrate the production order based on fixed formula ratio,thus the production line dosing the coarse materials from storage silos, after automatic weighing,the material will enter in premix tank and high efficient twin shaft paddle mixer continuously to mix in a short period(90-120 seconds). The well mixed material will discharge into the holding tank,which will make secondary mixing,then down to new designed automatic filling and packing machine,the packing machine work efficiently based on fixed time and volume,it increase the capacity sharply,well packed finished mortar will be transfered to end product area,ready for delivery out factory.

Main components and functions of the dry mix mortar plant

1) Feeding hopper: Material feed into the mixer from here.

2) Screw conveyor: Used for conveying the materials to the mixer, the conveyor can not heavy load starting.

3) Twin Shaft Agravic Mixer: Used for mixing materials uniformly, and the special paddle blades group can break up the fibre.

4) Finished product silo: Used for storing the finished goods material, waiting for packing.

5) Automatic weighing packaging machine: Used for packing finished product material in the finished products silo, it can automatically weighing and packaging, and accuracy can be + / - 0.5kg.

6) Control cabinet: The power switch control for this equipment of production line