Heavy Duty Pallet Rack,Storage / Metal Shelving System / Shelf Rack
Pallet Racking is a special storage system to conserve cargo put on
pallet. Each pallet need one position, thus it's also called pallet
position racking. The major components of racking system is upright
frame and beam. Pallet Racking system is simple but reliable.
According to the warehouse turnout situation and loading capacity,
there are various of specification and size to be chosen.
1.All the shelves shall be anti-rust.
2.The characteristic of corrosion-protection could keep the shelves
3.Powder coated in different colors for different parts shine the
4.The material of cold-rolled steel is extensible for kinds of new
5.Steel boards among the racks could be optional.
6.There is adjustable for the level height for the board.
7.Simple design but cover with big load capacity, the maximum up to
8.Humanization design upgrade the space of storage and operation.
9.Reasonable design concept to upgrade the efficiency of storage
10. Good qualitity with competitive price .
· 100% accessibility to individual pallets
· Easy picking lower levels
· Good storage density
· Easily installed and repositioned
· No special lift trucks required
Benefits Using Selective Pallet Racking:
|1||Selective pallet racking allows 100% access to every pallet
location at any time.|
|2||When correctly designed there are few limitations to the type of
goods that can be stored in selective pallet racking.|
|3||Selective rack is designed for your individual needs. It is
configurable to suit your storage requirements, your warehouse
parameters and your materials handling equipment.|
|4||Selective racking requires a relatively low capital investment, yet
provides the highest flexibility.|
|Performance of Racking System||Bulk Storage||Selective Pallet Rack|
|Selectivity of individual pallets||40%||100%|
|Use of floor space||80%||50%|
|Utilization of pallet posting||70%||98%|
|Speed of access and throughput||80%||80%|
|Stock rotation (FIFO)||40%||60%|
|Use of building height||30%||80%|
|Efficient Bottom Level Case Picker||No||Yes|
|Ease of relocation||100%||100%|
|Specialist handling equipment||No||No|
Because of the size and weight of pallets, important safety factors
have to be considered at all times:
1 Pay attention to any loose components in the pallet rack system,
and take the time to report any damage in the pallet rac k frame;
such frame damage could cause the pallets to fall
2 It is the owner’s legal responsibility to communicate this
important warning to all who are around storage racks:
“Never climb on racks during or after assembly. Storage racks are
not designed to be stepped on or climbed on. A slip or fall may
result in serious injury.”It is especially important to have highly visible warning signs if
the pallet rack system is used in retail environments, such as
wholesale centers, where the public is present.
3 Use only quality pallets that are not damaged. To save money, or
perhaps from neglectful management, some warehouses use pallets
until they become faulty and dangerous. Regular inspection of
pallets for broken or fractured planks or stringers, protruding
nails, and missing support blocks is essential. Damaged pallets can
cause loading and unloading problems; for example, loose stringers
can get hung up on the pallet racks, which can cause loads to fall
from high positions. Also, faulty pallets can cause obstruction
problems in flow systems by jamming certain pallet rack designs.
4 Always ensure that the proper motorized equipment is being used
for the application.
5 Do not obstruct the end of aisles by staging pallets in these
areas. Doing so can cause severe and potentially fatal injuries and
6 Never overload or exceed the recommended load specifications for
a racking system. Overloading may cause a catastrophic failure of
your storage rack system.
7 Rack audits (safety checks) should be performed on a regular
basis by a qualified inspector familiar with RMI design and safety
standards to make sure all aspects of system are up to 100%
Technical data for pallet rack system
|Style||Pallet storage warehouse rack|
|Selection||Single Row, back-to-back Rows and multiple Rows|
Dimension of pallet rack
Height: pitch is adjusted by increments of 75mm
|Customized Pallet: other special size( you can contact us directly)|
|Beam Range||Height: 80~160mm; Width: 45mm/50mm; Thickness: 1.5~2.5mm|
|Upright Range||80*60; 90*60; 90*70; 90*75; 100*67; 100*70; 100*75; 120*75;
120*87mm, Thickness: 1.5~3.0mm|
Customized: MOQ( per 20FT container)
|Weight Capacity||5000KG per level max ; 1500KG per pallet max|
|Package||Full container: Nude Package; manual handling|
Less than container: steel pallets + steel straps + corrugated
|Lead time||15-20 days for one container|
Food, beverage, chemical, tobacco and other single species, large
quantities and relatively single item product.
Date critical cargo such as fruit and food can also be stored.
※ Increase productivity
※ Minimize damage
※ High density storage
※ Maintain accessibility
Production Of Pallet Rack
Why Choose HUICHEN?
1. 17 years experience on manufacturing warehouse racking;
2. All types of racking comply with ISO9001, CE etc;
3. Have successfully done thousands of racking project;
4. Factory direct sale price, no cost for middle distributor.
Really important to choose a reliable warehouse racking supplier!!!