Razorwire Flat profile – a useful alternative to Concertina Razor
When the over hang of concertina is a problem, for instance if the
protrusion of Concertina Razor wire beyond your boundary is a
problem then Flat profile being vertical solves this issue. The
other advantage is its neater in appearance than Concertina and is
also very easy to fit.
|Barbed Tape Wire Specification|
|Outside Diameter||No. of Loops||Standard Length per Coil||Type||Notes|
|450mm||56||8-9M (3 CLIPS)||BTO-10.12.18.22.28.30||Cross type|
|500mm||56||9-10M (3 CLIPS)||BTO-10.12.18.22.28.30||Cross type|
|600mm||56||10-11M (3 CLIPS)||BTO-10.12.18.22.28.30||Cross type|
|600mm||56||8-10M (5 CLIPS)||BTO-10.12.18.22.28.30||Cross type|
|700mm||56||10-12M (5 CLIPS)||BTO-10.12.18.22.28.30||Cross type|
|800mm||56||11-13M (5 CLIPS)||BTO-10.12.18.22.28.30||Cross type|
|900mm||56||12-14M (5 CLIPS)||BTO-10.12.18.22.28.30||Cross type|
|960mm||56||13-15M (5 CLIPS)||BTO-10.12.18.22.28.30||Cross type|
|980mm||56||14-16M (5 CLIPS)||BTO-10.12.18.22.28.30||Cross type|
Product features: anticorrosion, prevent aging, sun resistance, weather resistance,
etc. Corrosion forms of electroplating, hot dip.
Conductor material: high quality, hot dip galvanized high carbon steel wire,
stainless steel wire, etc.
Blade material: high quality, hot dip galvanized steel plate, stainless steel
Process: it USES the steel plate (dao) package attached stamped on the hot
dip galvanized steel wire (core), made the blade sharp Angle of
galvanized steel or stainless steel sheet, high tensile steel wire
do a mix of conducto
Razor wire and stinging scraper type, is a kind of protective
developed in recent years, the capability of isolation of new fence
products. A sharp knife stab type by double occurs after snapping
into shape, are beautiful and chilling. Has played a very good
deterrent effect. Beautiful and practical
Countries around the world have razor wire is widely used in
military stronghold, prison, government agencies, Banks, and
residential fence, private house, villa walls, doors and Windows,
highway, rail barrier and border to security protection
Installation of Razorwire Flat Profile
Installation of Razor Wire (flat profile) is particularly simple.
It can either be supported by clipping or wire tying to the surface
part way up or alternatively by fitting brackets to the existing
fence posts and then running a line of support wire through the top
hole of the bracket and weaving it through the Razor Wire.
Either way we can supply you with the necessary vertical uprights,
straining wire and bolting to enable self fit to a fence or wall.
Supplied in 10m x 500mm rolls
Flat Razorwire Specs
|PRODUCT||BLADE STYLE||BLADE THICKNESS||WIRE DIAM||BARB LENGTH||HEIGHT|
Choosing your Razor wire
The bigger the diameter the more of an obstacle and deterrent the
Razor wire is. 450mm diameter is the smallest size we recommend for
domestic type applications. This size is normally an adequate
deterrent and also the easiest to fit as standard support brackets
will generally do for this diameter and weight of razor wire. 730mm
or even 900mm diameter will require specially made brackets for the
If fitting to the ground then we would recommend a size that cant
be vaulted over, then the suggested options would be to install a
single run of 900mm diameter Razorwire or alternatively stack
smaller diameter Razorwire on top of each other either vertically
or in a pyramid fashion.
Points to note when selecting Razor Wire
- The core wire diameter:
2.5mm is the industry standard, anything less has proportionately
less tensile and inherent strength.
- The number of loops per coil
This determines the amount of Razorwire on the coil and therefore
the profile density when deployed, an important point when
comparing prices. All our coils have 55 loops per coil, this means
the coils can be extended easily up to 10m whilst maintaining a
dense profile of Razorwire.
- Stainless Steel or Galvanised?
The environment the product is being deployed in may determine
whether Stainless Steel or Galvanised is the best option. Stainless
Steel is considerably more expensive but offers greater durability
especially in salt air environments and over time will outlast
Galvanised therefore making it the best long term option in salt
air. However Galvanised is more than adequate for most UK regions
and applications. We would always suggest you check the level of
zinc coating when selecting Razorwire, all our Galvanised products
are 200g/m2, if the supplier cant provide the information, you may
only be getting a product with 60g/m2 which will deteriorate and
rust much more quickly.
- Blade type
Smaller blades such as BTO10 (10mm) are quite small and therefore
less of a deterrent, larger blade profiles such as CBT65 (65mm) are
much more effective but the blade type will also be reflected in
- Blade thickness
0.5mm is the industry standard, anything less is likely to bend
razor wire loading
concertina razor wire when pull open
razor wire with clips
security fence with razor wire