Contact us :
ShangHai Zhengye Hot Melt Adhesive Co.,Ltd.
No 5, Lane.188, Nanlu Highway, Pudong New District, Shanghai
T-1106A Book binding special PUR glue
SY-1106A is a one-component moisture curing hot melt adhesive. It
is non-toxic and non-polluting. It is mainly used in the printing
field of hardcover books, annual reports, catalogs, yellow pages,
and magazines. It is characterized by good initial strength,
waterproof and heat resistance. It is resistant to creep and has a
high bond strength, which can keep the book evenly balanced.
|Item-No||Appearance||Viscosity(cps)||Opening time (relative to material and temperature)min||Operating Temperature ℃||Application|
|T-1106A||Milky white solid||4000-5000/120℃||above 10min||130-150||Mainly used in printing fields such as hardcover books, annual
reports, catalogs, yellow pages, and magazines.|
1, the hydrophobic treatment material on the surface of the bonding
material, oil stains, dust will affect the bonding fastness, and in
any case, specific tests are required.
2, PUR products mainly rely on moisture reaction to achieve the
final bonding strength, so before the product is used, it should
maintain and check the integrity of the aluminum foil packaging,
prevent moisture from entering the packaging, so that the viscosity
of the product increases greatly, and finally affects the fit.
3. When the PUR product is under high temperature, the viscosity
will increase to a certain extent after 1 hour. It should avoid
excessive temperature (> 140 °C) during the shutdown period and
melt the PUR product for more than 3 hours. It is recommended to
start continuously. In the case of melting and using PUR products.
4, curing at 25 ° C, relative humidity greater than 60 %, it is
recommended to enter the next process after 24 hours.
5. If the glue consistency in the molten state is found to increase
significantly in the molten tank, please contact the sales person
immediately to confirm that there is no problem before continuing
6, if the quality of the finished product after the composite,
please contact the sales staff immediately to understand the
problem, clear the responsible party can consider shipping.
7, daily maintenance, after work every day, you need to seal the
scraper, sealing method: the scraper outlet is sealed with aluminum
foil tape, wipe the high temperature butter to prevent air from
entering. Before starting the next day, clean the high temperature
butter and remove the aluminum foil tape for production. If you do
not turn on the machine for 3 to 5 days, you need to heat the
machine and then drain the glue from the scraper, about 300 g. Then
seal it. If you do not turn on the machine for a long time, such as
more than 7 days, or the holiday of the New Year, you need to
replace the cleaning agent, completely discharge the glue to
prevent the glue from curing.
8. The barreled glue should be placed on a wooden pallet in a dry,
ventilated, cool environment.
The shelf life of polyurethane hot melt adhesive 1106A in original
sealed containers is:
Metal drum: about 6 months
Pay attention to moisture!
On the sales or technical leaflet, the product use instructions and
recommendations made in any other form during the technical
consulting service are referential and only serve as a reference
before the user uses it, and do not constitute a guarantee
statement that the company assumes legal responsibility. The
company will adjust the relevant content without prior notice. Due
to the need for knowledge protection, this information may not be
provided to third parties without our permission.
Factory pics :