Barium Chloride 99.0% Chemical Reagents White Powder Or Colorless
Crystal For Industry
Commodity: Barium Chloride
Appearance: White Powder
Molecular Weight: 208.23
CAS No.: 10361-37-2
UN No.: 3264
Package: In 25kg or 50kg PP bags
Certificate of Analysis
|Water Insoluble Matter, %≤||0.05|
It is mainly used for metal heat treatment, barium salt
manufacture, electronic instrumentation, and also used as a heat
treatment agent in mechanical processing. Determination of sulfate
and selenate, chromatographic analysis, spot analysis of platinum,
water softener. Fabric dyeing.
Handling and Storage
Handling Precautions: The substance is stable under normal storage
and operating conditions, and general handling measures should be
followed. Keep containers tightly closed when not in use and avoid
contact with eyes, skin, and clothing. Prevent dust and aerosol
formation. Avoid ingestion and inhalation. Use special instructions
before use. Make sure there is good ventilation or exhaust in
places where dust is generated. General fire protection measures.
No smoking. Keep away from heat and sources of ignition. Care must
be taken when handling and opening containers. It should be lightly
loaded and unloaded during handling to prevent damage to the
packaging and containers. Empty containers may contain residues and
should not be reused. The operator must undergo special training
and strictly observe the operating procedures. It is recommended
that operators wear self-priming filter-type dust masks, chemical
safety glasses, and rubber gloves. Avoid dust.
Storage Precautions: Seal the container and store in a cool, dry,
ventilated, fire-resistant area away from incompatible materials.
Under normal conditions, no dangerous chemical reactions occur
during storage and use. Avoid high temperatures, direct sunlight,
moisture or other ultraviolet radiation. Insulate fire, keep away
from heat and extreme temperature storage. Keep away from
halogen-halogen compounds, oxidants, reducing agents, acids, etc.
It should be transported and stored separately from food, seeds,
food, beverages, feed, various daily necessities, and food
chemicals. Check containers regularly to avoid damage and leakage.
Opened containers must be resealed to prevent leakage. Do not store
in unlabeled containers. The storage area is equipped with
appropriate types and quantities of fire-fighting equipment,
leakage emergency treatment equipment and suitable containment
materials. Use appropriate containment methods to prevent
contamination of the environment.
First Aid Measures
Skin contact: remove contaminated clothing and rinse skin
thoroughly with soapy water and clear water. Get medical attention.
Eye contact: lift eyelids immediately, rinse your eyes with plenty
of flowing water or normal saline. Get medical attention.
Inhalation: Rapidly evacuated from the scene to fresh air and keep
the airway open. If breathing stops, take artificial respiration
immediately. If breathing is difficult, give oxygen. Get medical
Ingestion: Drink plenty of warm water and induce vomiting. Stomach
wash with 2%-5% sodium sulfate solution. Get medical attention.
Fire Fighting Measures
Hazardous characteristics: This product is toxic, non-flammable,
non-explosive. Touch the skin easily through the skin to absorb or
eat, inhalation of steam, dust can cause poisoning.
Hazardous combustion products: This product is not flammable.
Fire extinguishing method: Use water, foam and sand to save, but it
is necessary to prevent the dust of the articles and pay attention
to collection and recovery.