LQ2000 Vertical glass washing and drying machine with stainless
1.1 The input section adopts Japan’s Keyence LOW-E glass diagnosis
system,it can easily know whether the LOW-E glass put in the right
way or not,when it is wrong ,it will warn the workers via the
alarm.This system can prevent the film of the coating glass
especially the LOW-E glass from being destroyed and washing in the
1.2 The transmission is carried by the motor and the transmission
speed is stable .The speed of the input section is as same as the
washing and drying section ,it also can be changed by the
1.3 The backboard close to the washing section has specially
coating metal materials to avoid deformation and corrosion.
2 Washing and drying section
The interior and shell of washing and drying section are used 304
stain steels and anti-corrosion materials.
2.1 Washing part
The washing part has three pairs of brushes,four pairs of nozzles
and four pairs of rubber rollers.And the brushes and rubber rollers
are used SKF oil free lubrication waterproof bearing to avoid the
The brushes are controlled by 3 synchronous motors separately and
the movement is stable. Brushes are used high temperature
resistance nylon wire.The front brushes which is about 0.07mm in
diameter is softer than the brushes behind it .The front soft
brushes can guaranteed the coating glass especially Low-e glass
can’t be destroyed.
Four pairs of nozzles can adjust the angle.
The rubber rollers are convenient for convey the glass.The fourth
pair of rubber rollers can reduce the water on the glass. It can
adjust according the thickness of the glass automatically.The
materials of the rubber rollers are acid and alkali resistant.
These brushes can automatic adjust distance by Airtac cylinder.
The waterway system consists of two independent waterway
circulation systems, namely a primary waterway cleaning system and
a secondary waterway cleaning system.The glass is first cleaned by
the first-stage cleaning waterway, and then rinsed by the rinsing
waterway. The water is pumped out from the water tank by the water
pump, sprayed on the glass surface through the spray pipe, cleaned
by the brush, and then returned to the water tank for recycling.The
water tank of the washing machine is equipped with a water heating
system. It is recommended to use at room temperature less than 7
℃.And it can reserve 0.5m³ water.
2.2 The drying section:
The air enters into the air knife from the top.The distance between
the air knife and the glass can be adjusted according the thickness
of the glass in order to guarantee the drying effect.
It adopts low noise and high pressure blower,the wind power is
strong,it can improve the efficiency of drying . The wind that
entered into the air knife have been filtrated.So it can avoid the
secondary pollution.Air heating system for improved drying
The outlet of the machine is equipment a flow regulating valve
.When the light inspection stop working, the wind outlet will close
automatically to avoid the contamination what because of the long
time blowing.This function also can save energy.
In this section also adopts sound insulating cotton to reduce the
noise.When the machine working the noise lower than 75 decibels.
|Power supply:||380V 50Hz|
|Max. process glass height||2000*2650mm|
|Min. process dimension:||200×450mm|
|Thickness of glass sheet:||3~15mm|
|Max. process speed:||45m/min|
Packing & Delivery:
1. Machine packing with plywood pallet or according to customers`
2. In plywood pallet and plastic film
3. In container
1.Question:Are you a manufacturer?
Yes,we are the professional insulating glass processing machines
manufacturer, which has 18 years history since 2001.
2.Question: How about the service ?
1).Reply it at once in WhatsAPP,if by email,it will be reply within
2).18 hours for after-sale serive
4).more than 15 years experience in this kind machine field
5).fluent english ,communication barrier free. Point-to-point
service help you solve the problems timely.
3.Question:What’s the guarantee ?
1). Our guarantee for 12 months.
2). 18 hours’ technical support by email, video or calling
3). English manual and video tutorial
4). 24 hours on line service each day, free professional technical
4. Q: Do you provide equipment operation training?
A: Yes. We can will send one or two professional technicians (one
is electrical engineer, one is mechanical engineer) to install and
adjust the machines and help train the workers.
5.Question:Why your price isn't the lowest price compared with
others company or factories ?
1) We are a innovative enterprises. We have a a professional and
experienced technical elite team. Every year we will apply for
innovation patents for our insulating glass machine, likes auto gas
filiing machine, auto loading machine and etc.
2)Compared with the same level brand, we have the same functions
and components, but our price is the most competitive. At the same
time, our after sales service is satisfactory. We have a good
reputation in our customers.