Gas Fired Aluminum Metal Melting Furnace Pipe Burning System Saving
1) The furnace lining is composed of the casting material and the
ceramic fiber module material, which has the
characteristics of good heat preservation effect, small heat
storage and fast heating rate. The wall temperature
rise is ≤ 40℃.
2) The metal melting furnace adopts separation type burning system
with PID control, which significantly reduces
energy consumption. The temperature control accuracy reaches ±5℃.
3)The metal melting furnace is equipped with one thermal couple
protected by the silicon nitride outer pipe, and this
thermal couple could directly measure the aluminum liquid.
4) The furnace adopts European brand graphite crucible, which has a
good thermal conductivity,
a long life, and no iron hyperplasia.
5) The metal melting furnace is equipped with liquid leak alarm,
over-temperature alarm and other functions
to ensure the safety of equipment and operation.
6) The metal liquid is automatically poured out, easy, safe and
|Model||Crucible Capacity (kg)||Melting Capacity (kg/h)|
Overall Dimension (mm)
L * W* H
Advantages of separation pipe burning system:
1) the separation pipe burning system has a lower fault rate, and a
low maintenance cost.
2) the separation pipe burning system has a low energy consumption.
3) the separation pipe burning system has a more accurate control
of the temperature.
Our company supplies the oil fired or gas fired zinc powder rotary
melting furnaces, oil or gas fired zinc powder rotary metal
melting furnace, gas oir oil fired aluminum scrap melting furnaces,
reveberatory aluminum melting furnace, continuous aluminum
melting furnae, aluminium melting furnace crucible melting furnace,
aluminum liquid transfer ladles, aluminum ladle preheater,
electric aluminium melting furnace, electric aluminium holding
furnace, gas fired aluminum holding furnace, box type resistance