Tilo Camera Testing Light Booth VC-118-S Wide Angle Fisheye Camera
The VC-118-S camera test light box is a newly developed special
camera test light box by Tilo.
This product can test cameras with different angles of view while
using the same chart. Built-in mobile slide, easy to move the
camera back and forth. The LED light source with high color
rendering index, no flicker, long life, and stable color
temperature is configured in the light box. The user can move back
and forth and rotate the light source panel left and right
according to different conditions to obtain a more uniform lighting
VC-118-S camera test light box is mainly composed of box body,
light source control box and bracket.
1. Dimensions: 115*104.5*172.8 CM (L*W*H).
2. Box Size: 110.6*100.1*80 CM.
Box window size: 44.7*70 CM ( W*H)
3. Connector mounting plate size: 25*15 CM (W*H).
Standard installation on the connector mounting plate: 1 RS232
connector, 1 AV socket, 2 USB connectors, 2 cable holders, 2 DC
seats, and 1 PM06 quick connector.
4. Light source control box size: 50.8*24.8*13.1 CM.
5.Operating Temperature : 0-40 °C, relative humidity less than 85%
6. Input voltage: AC220V, 50/60Hz, maximum power consumption 160W.
7. Net weight: 130kg.
1. Please use a suitable power supply and check the power label on
the back of the light box before use.
2. When placing, ensure that the minimum distance between each
light box or between the light box and the wall is 20cm. Make sure
that there is a enough distance between the light box and
3. The light box can no longer be used in explosive atmosphere
4. Be careful not to place the light box in a position near the wet
water and water pipes and fire sprinklers. Keep the room dry.
5. Use a clean, lint-free cloth with water or water containing a
small amount of neutral detergent to remove stains on the surface
of the light box. Disable chemical solvent wipes and scratch with
6. When maintaining and replacing the light box, cut off the main
Camera test light box VC-118-S function introduction
1. The box surface has a neutral grey color.
2. The window of the box is covered with a black cloth curtain,
which is easy to open and close. Closing the curtain during
operation ensures that the internal working environment is free
from external influences.
3. There is a camera moving platform installed in the middle of the
box. Two locking linear slide rails are installed under the
platform. The platform can move back and forth, and can also be
moved to a certain position to fix the slide rail.
A high- color rendering index, standard color temperature, and no
stroboscopic LED light source are installed on the left and right
sides of the mobile platform, and the light source illumination is
adjustable. The LED light source lamp board is installed with two
locking linear slide rails, which can be moved back and forth and
moved to lock the slide rail at a certain position. Loosen the
butterfly hand screw nut on the lamp holder. The LED light source
lamp board can be rotated to adjust the angle so that the light
from the light source illuminates the back of the light box more
evenly. After determining the angle, tighten the wing nut to fix
The light source control method of the VC-118-S camera test light
box is as follows
1. Connect the power connection cables of the left and right LED
light boards to the LED power connector plug 1 and plug 2 of the
light source control box, the connection cable does not distinguish
the left/right sides.
2. Connect the 220V power cord to the light source control box
3. Turn on the 1-way light source power switch and rotate the 1-way
light source dimming knob to control the brightness of the 1-way
LED light source in the left and right lamp boards. Rotate the
light source clockwise from dark to brighten, and rotate the light
counterclockwise to brighten gradually from light. The dimming knob
is divided into two levels of control, the first dimming knob 1 and
the second dimming knob 2 . The same method controls the other
3-way LED light sources.
Camera test light box VC-118-S light source description
VC-118-S camera test light box standard is a 6500K ± 200K color
temperature LED light source. Users can configure the light source
according to their needs (see the following table).
|Color temperature T||Color rendering index Ra|
The VC-118-S is a light box designed for camera testing. It can be
used to test different angles of view. The maximum number of ISO
12233 standard test charts can be posted on the back of the light
box up to 2 times (712mm*400mm). In addition to the standard
ISO12233 test chart, there are also graphics charts for wide-angle
lens and fisheye lens testing. All the back of the charts is
magnetic, and the card can be placed anywhere in the light box
according to user requirements.
Wide-angle lens test
Fisheye lens test
Camera test light box VC-118-S maintenance
1. The free maintenance period of the light box is 1 year.
2. When performing maintenance on the light box, turn off the main
power and unplug the power line.
3. If the light box wall plate, bottom plate, reflector plate is
covered with dust or fingerprints, mimeographs and other stains,
spots, gently wipe the dirt with a clean white soft cloth dampened
with water or water containing a neutral detergent. Do not use hard
shaving and chemical solvent decontamination to avoid damaging the
surface coating of the wall of the light box.
4. If the light box surface coating is damaged or discolored, it
should be replaced.
Camera test light box VC-118-S packing list
|Light source board||1 Set|
|Work platform||1 Set|
|Light source control box||1 Pcs|
|Light source connection cable||2 Pcs|
|Power supply||1 Pcs|
|Instruction manual||1 Pcs|
The number of light sources panels can be customized according to the user's needs. Each set includes
two light panels.
Shenzhen Tilo Technology Co., Ltd
Add:F/6, Block 5B, Skyworth Inno Valley, Tangtou 1st Road, Shiyan,
Baoan District, Shenzhen China.
Tel: 0086-755-2719 8826 Ext: 639
Fax: 0086-755-2719 0609