Air Flotation Mineral Processing Equipment Blocked Sedimentation
Blocked Sedimentation Machine Specification:
• Wet scrubbers have the ability to handle high temperatures and
• In wet scrubbers, flue gases are cooled, resulting in smaller
overall size of equipment.
• Wet scrubbers can remove both gases and particulate matter.
Blocked Sedimentation Machine Main Feature:
1. By use of impulse technology, the dust collector has a strong
ability of cleaning dust, high efficiency, and is with low leakage
rate, less energy and steel consumption, small areas. The equipment
works stably, and wins good economic returns, which is applied for
cleaning dust in several industries, such as metallurgy, building
materials, machine, chemistry, electricity, light industries and so
2. The box is designed in a good seal. Excellent seal materials are
used in making the inspected door. During its process, check it by
using diesel and with low leakage.
3. At the opening of outlet is with compact layout and low
4. Adopt blowing pulse cleaning dust so as to make the cycle
extended and the energy reduced. It can improve twice service life
of filtering bags and valves.
5. Change the filtering bags without stopping the machine and
overhaul has no effect on operating the equipment.
6. By putting bags on the upper part, checking level is improved.
The introduction of Blocked Sedimentation Machine
wet dust collector makes the compressed air as driving force for
cleaning air, uses pulse injection organization releases the
compressed air instantly and induces the severalfold secondary air
into the filter bag at high speed to make the bags expand rapidly
so as to impact,shake and reverse flow to clean the dust.
The products are a series of products with the filter bag for a set
number 12, mainly in 24 bags, 36 bags, 48 bags, 60 bags, 72 bags,
84 bags, 96 bags, 112 bags, 120 bags.
The features of wet dust collector:
1.High Purification efficiency, ability to handle large gas
2.Stable performance,long service life
3.Convenient operation and maintenance
4.Suitable for dust removing of a variety of multiple points of
Structure of wet dust collector:
wet dust collector is made of five parts: the upper, middle, lower
box, ash systems, and blowing system, blowing system include
control instrument, solenoid valve, blowpipe, and gas bge. Box
include inlet and outlet box, perforated plate, filter material,
dragon skeleton and Venturi tube.
Operating principle of wet dust collector:
Dusty gas from the air inlet of wet dust collector into the middle
and lower box, through the bag filter's effect, separate the dust
from gas, dust was adsorbed on the surface of dust bag, clean air
is discharged to the outlet through filter bags, dust attached to
the surface of the filter bag grows thicker as time goes by.
According to the setting of injection procedure, pulse injection
valve receives the order issued by the controller, trigger to open
in order, the compressed air in the gas bag spray out from each
hole of injection tube and jet into each corresponding filter bag
via venturi, the dust attached to the surface of filter bags fall
off into the ash hopper and expel from ash valve.