Fully Auto PET Material Bottle Blow Molding Machine Four Cavity
|Project name||Bottle blowing machine|
|Bottle type||100ml - 2000ml bottle|
|Capacity||3800 - 4000 pcs per hour|
|Bottle type||Freely design|
|Auxiliary machines||Full set|
Blow molding machine is suitable for producing PET plastic
containers and bottles in all shapes. It is widely used to produce
the carbonated bottle, mineral water, pesticide bottle oil bottle
cosmetics, wide-mouth bottle and hot fill bottle etc.
|Productivity||Depend on bottle design||3800-4000PCS/H|
|Product type||Body diameter||20mm-100mm|
|Main machine power||Electrical source power||380v 3Phase /220v 3Phase 50/60HZ|
|Really use power||14kw|
|Auxiliary equipment(preform unscrambler)||L*W*H||2000*950*2480mm|
1). Preform self-rotation and infrared pre-heater revolution assure
the even distribution of heat, which improve the bottle shaping
rate, increase the production.
2). High safeties with security automatic-locking device in each
mechanical action, which will make the production into a perfect
safe environment, in case of the breakdown in certain procedure.
3). Low cost,high efficiency,easy operation and maintenance etc,
profited from the fully automatic technological process.
4). Satisfaction with different atmospheric pressure for blowing
and mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the machine.
5). Introduce the FESTO air cylinder to avoid contamination and noise.
6). Ideal cooling system make the finished bottles without any
7). Low rejection rate: less than 0.2 percent.
8). Easy for you to install,test and start up.
|Infrared thermometer||America raytek|
|Note||All of the electrical components adopts CE,UL,CCC approved
international advanced high-tech product.|
More photos for ref