Fully Auto Two Cavity PET Bottle Blow Molding Machine 5 - 10L
Full automatic blow molding machine is suitable for producing PET
plastic containers and bottles in all shapes. It is widely used to
produce the carbonated bottle, mineral water, pesticide bottle oil
bottle cosmetics, wide-mouth bottle and hot fill bottle etc.
Suitable for producing PET plastic containers and bottles in all
shapes. It is widely used to produce the carbonated bottle, mineral
water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and
hot fill bottle etc.
1). Stable performance with advanced PLC.
2). Automatic preform conveyer to save human cost.
3). Preform self-rotation and infrared pre-heater revolution assure
the even distribution of heat, which improve the bottle shaping
rate, increase the production.
4). High adjusting performance to enable preheat the preforms
perfectly by adjust the voltage control area in the PLC, which
could adjust the temperature of the infrared lights in the
pre-heater, and keep the proper temperature and humidity
5). High safeties with security automatic-locking device in each
mechanical action, which will make the production into a perfect
safe environment, in case of the breakdown in certain procedure.
6). Introduce the FESTO air cylinder to avoid contamination and
7). Satisfaction with different atmospheric pressure for blowing
and mechanical action by dividing the blowing and action into three
parts in the air pressure diagram of the machine.
8). Strong clamping force with high pressure and double crank links
to lock the mould.
9). Two ways of operating: automatic and manual.
10). Safereliable and unique design of the position of valve to
make the pneumatic diagram in the machine easier to understand.
11). Low costhigh efficiencyeasy operation and maintenance etc,
profited from the fully automatic technological process.
12). Ideal cooling system make the finished bottles without any
13). Easy for you to installtest and start up.
14). Low rejection rate: less than 0.2 percent.
|Product Name||Global Market Product Semi Automatic Bottle Blowing Machine|
|Item Type||Bottle Blowing Machine|
|Place of Origin||Jiangsu, China (Mainland)|
|Productivity||3200-4000PCS/H, depend on bottle design|
|Main machine power|
|Electrical source power||380v 3Phase /220v 3Phase 50/60HZ|
|Really use power||14kw|
|LP air compressor||1.6m3/min 1.0MPa 1set (15KW)|
|HP air compressor||1.0m3/min 3.0MPa 2sets|
|Air dryer||2.0m3/min 3.0MPa 1set|
More photos for ref