Home > Bag & Luggage Agents >

Crude Oil Processing Dry agent Demulsifier For Desalination And Dehydration Adsorbent

Categories Oil Recovery&Refinery Chemicals
Brand Name: JTL
Model Number: Demulsifier
Certification: ISO9001,SGS
Place of Origin: CHINA
Payment Terms: T/T, Western Union
Supply Ability: 1000 TON/YEAR
Packaging Details: Drum-net weght:20KG
Type: Surfactant
Usage: Petroleum Additives, Adsorbent
other name: Crude oil dehydrating agent
Appearance: Light yellow to brownish-yellow uniform liquid
Relative dehydration rate: 93%
CAS No.: 9010-79-1
Hs code: 3906901000
Application: Desalination And Dehydration In Oil Refinery
  • Product Details
  • Company Profile

Crude Oil Processing Dry agent Demulsifier For Desalination And Dehydration Adsorbent

Crude Oil Processing Dry agent Demulsifier For Desalination And Dehydration Adsorbent

Demulsifier products has more than 10 specifications, The non-ion type and ion type have been successfully applied to more than 10 devices in oil refineries and oil fields. The products can satisfy demands of crude oils with different properties on dehydration and desalination, and have an obvious effect on reducing scaling and corrosion of equipment, reducing energy consumption and improving product quality.

Basic Specification

Serial numberItemIndicatorMeasuring method
1appearanceyellowish-white thick liquidocular estimation
2relative dehydration rate%≥90SY/T5281-2000
3relative desalination rate%≥90SY/T0536-2008
4condensation point °C≤-20GB/T510-1991
5density (20°C)g/cm<3>0.85-1.05GB/T 1884-2000
6PH value7-11.5

GB 9290-2008

Instruction of Use

1. The product can be continuously injected via a trace plunger pump or be injected after dilution.
2. To two-level and two-level above electrical desalting devices, both first grade injection and graded injection are available, and the amount of the injected first grade demulsifier should be no less than half the amount of the total injection amount.
3. The amount of the injected demulsifier product is different according to different properties, or water-containing amount and salt-containing amounts of the crude oil. Usually, 30 to 50ppmm of demulsifier is injected according to processing amount of the crude oil.


1. Petroleum demulsifier should be used independently, and can not be used together with other demulsifiers without appraise and selection.
2. Compound demulsifier is large in molecular weight and high in viscosity. After the compound demulsifier added into a device, stirring is necessary before being used.

Packaging and Storage

1. The product is packaged by 200L barrel, net weight of each barrel being 200kg, or packaged according to demands of a client.
2. The product needs to be prevented from crash in loading and transportation in order to avoid leaks. 3.Quality guarantee period in cool and airy environment is one year.


We can provide different concentrations of oil-soluble demulsifier products, and help guide users to dilute high-concentration products into low-concentration finished products for use.

About demulsifiers

Demulsifier is mainly a non-ionic surfactant, which is formed by polymerization of the starting agent with epoxy propane and ethylene oxide block, or by modifying or compounding the polymer.Demulsifier is mainly used for demulsification and dehydration of crude oil in oil field, and also for desalination and dehydration in refinery.According to solubility, it can be divided into water solubility and oil solubility.According to the initiator, it can be divided into alcohol, amine, phenolic resin, phenolic amine resin, compound initiator and so on.According to its application, it can be divided into conventional demulsifier, ternary compound flooding fluid demulsifier, heavy oil demulsifier, condensate demulsifier, high wax demulsifier, water demulsifier, low temperature demulsifier, high flash point demulsifier, etc.

Demulsifier is widely used in Petrochina, Sinopec, Cnooc, Sinochem, Yanchang petroleum and other domestic oil fields and refineries.


Fuel Washing Desalting And Dehydration, demulsification and dewatering of crude oil in oil field



1. contact personnel should wear protective equipment when using non-ionic polyacrylamide, skin contact area should be immediately washed with clean water.

2.keep dry bath, non-ionic polyacrylamide to avoid sprinkling on the ground, if wet and slippery, clean up in time to prevent slipping.

3.try to prevent moisture absorption, sunlight exposure.

Factory show

Our company also exports products to all over the world,including to Philippines,Thailand,

India,Vietnam,Bangladesh,Chile,Brazil, Australia.

Highlights of our Factory

>> Top three factory: over 60,000 tons annual capacity;

>> Quality guarantee: ISO9001, ISO14001, OHSAS18001 certified;

>> Technical advantages: First and only one can produce both PAM and its raw material DAC in China;

>> Collinear production line: Flexible to adjust production.

Quality Crude Oil Processing Dry agent Demulsifier For Desalination And Dehydration Adsorbent for sale
Send your message to this supplier
Characters Remaining: (0/3000)
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    More from this Supplier
    Contact Us Quickly