Cheap UPVC Windows and Doors, PVC windows and doors
|Profile||Profile:3 chambers,top quality profile brand;|
Color:white or any color as per the customers' requests;
Surface treatment: power coating,lamination,co-extrusion,embossed
Surface treatment:galvanized steel reinforcement
common dimensions: 600*600,900*900,900*1200,1000*1000,1000*1200,1200*900,1200*1000,
available in any size as per the customers' requests
|Glass||4mm,5mm,6 common or tempered single glass|
|Hardware||sealing :PVC & EPDM rubber seal;|
domestic high quality crescent lock;
with mosquito net, with or without grids
|Features||with cheap price|
good apperance, heat insulation, sound insulation, water tightness.
easy to install, clean and maintain.
|Price Terms||FOB(shanghai),CFR or CIF|
|Payment Terms||T/T 30% as the deposit and balance before shipment,or L/C at sight|
|Minimum Order||10 M2|
Procedures to manufacture a window/door
Setp1 Choose profile system according to clients' requirements(there are
choose profile according to the open style and thickness of the
Step2 design the window/door with CAD drawings(we provide the drawings to
clients for their
confirmation before production);
Step3 work out the production list and give order to the workshop;
Step4 cut profile in needed length;
Step5 drill lock hole,drinage hole.etc;
Step6 assemble the frame and sash(we use high quality aluminum corner
connector to make the
frame and sash stable enough);
Step7 install the hardware(use stainless steel screw);
Step8 combine the frame and sash;
Step9 check the quality;
Step10 package(wrapping film+wood pallet);
Step11 load the windows and doors in container for shipment.
This is Martin,I have been in this field for more than 5 years.I
used to work in the workshop for
almost 2 years,then I began to do the foreign trade.Now,Ican do every job of windows and
doors manufacturing and exporting.
First,we talk about the detailed requirements of the windows and
Second,I design and provide CAD drawings to you for your
Third,I work out the production list and give production order to
the workshop,they begin to
manufacture,during this procedure,I stay in the workshop to control
Fourth,after production,I will arrange the shipment.
Fifth,I offer advice on the installation if necessary.
1.Our factory has 10 year's manufacturing and exporting experience.
2.We are specializing in producing aluminium windows and
doors,carports and sunrooms.
3.Our product quality is controlled by ISO9001:2008,and we have
4.We've exported our products to
etc,more than 22countries.
5.Any small order or trial order is accepted.
6.Good pre-sale and after-sale service.
7. 10 years quality warranty.