3 Inch Stainless Steel Lap Joint Band Exhaust Clamp for Automotive
Motorsports Car Exhaust System
Butt / Lap joint band exhaust clamp provide a very simple,
effective way when connecting your exhaust systems with 360°seal .
The unique seal and high clamp loads are supplied without
distorting your exhaust components, allowing the flexibility to
disassemble for service. Regular exhaust clamps will distort the
tubes when you try to tighten to make it more seal. With an I shape
reaction block, which has arc curved face, together with a bolt,
the clamp can create a complete "Inner circle Seal", helping avoid
any leak of exhaust gas or noise.
The installation is very simple, customer only need to put one of
the nut bar on one side and insert the bolts, put another nut bar
on, then screw the nuts, and connect two pipes of unequal outside
The band exhaust clamp can be used in wide application, like pipes,
exhaust tips, tailpipe, catalytic converters, muffler repair
projects, catback systems, racing exhaust, show cars, exhaust
manifold, exhaust resonator, exhaust flex pipe and so on.
Description of application effect :
Compared with conventional U-clamps and flat band clamps, such high
torque clamps offer a much tighter sealing environment by using a
reaction block that transfers bolt torque into clamp strength which
assures a tight seal.
There're full sizes for Band Exhaust Clamp , pls check and select
carefully, if any questions, contact us for suggestion.
Small end ID(mm)
Big end ID(mm)
Features of Band Exhaust Clamp:
- The Butt / Lap joint band exhaust clamp is a strap of metal,
usually stainless or galvanized steel, which will wrap around the
exhaust pipe joints easily. Because of the good design structure,
this exhaust clamp helps to minimize the part number and maximize
the material usage to reduce the weight .
- I-Block helps to distributes the clamping force evenly over the
entire 360° , which prevent any leaks or material distortion or
damaging on the pipe.
- The band is a pre - formed ring, which brings low cost and cheap
- 304 stainless steel or galvanized material for a long life, and
preventing clamps from rusting , corrosion resistant and water
- High clamp loads
- Available in a wide range of styles and sizes , customized shape
and size are welcome
Pakaging and shipment:
50 pcs or 60 pcs /carton or as requriement
5 days if stock available, large order production leadtime will be
We produce many kinds of clamps, standard or as customer design,
some other exhaust clamp for your choice. If you had OEM clamp
inquiry, don't hesitate to discuss with us.