84kw High Temperature 55°C Bubble Pool Heat Pump, For Spa Sauna
Swimming Pool Heat Pump Water Heater
|Heating capacity: 84KW||Maximum water temperature: 55 ° C|
|Input power: 22KW||Voltage / frequency: 380V / 50V / Hz|
|Current: 40A||Working environment temperature: (-25 ° C) - 45 ° C|
|Noise: ≤75Db(a)||Heat exchanger: anti-corrosion titanium heat exchanger|
|Water flow: 28000L/h||Interface size (flange): 75DN|
|Above parameters test conditions as follows: environment dry bulb
temperature 20 ℃, wet bulb temperature 15 ℃, into the cold water
temperature 15 ℃, the water temperature of 55 ℃|
Swimming pool heat pump
- Type: swimming pool Heat Pump
- Installation: Wall Mounted/Freestanding
- Storage / Tank less: Storage
- Housing Material: Stainless Steel or Galvanized Steel Sheet
- Use: Indoor Swimming Pool
- Certification: CE, EMC, UL, SAA, ETL, ISO9001
- Place of Origin: Guangdong, China (Mainland)
- Brand Name: Meeting, we welcome OEM
- Heat Pump Function: Heating & Cooling & Constant
Temperature & Hot Water for Bathing
- Heat Pump Lifetime: 15 Years+
- Ambient temperature: -25℃ to 45℃
- Heat Pump Leading Time: 1-25 Working Days
- Refrigerant: R32 / R410A / R417A / R407C / R404A
- Port of Delivery: Guangzhou/Shenzhen Port
1. Complying with ISO standard. Quality Ensured.
2. Complete Inspection for each unit before out of factory,
covering water system and electricity detection and testing,
ensuring 100% right product before shipment.
3. Strict quality control during production. We have liquid soap
detection, halogen detection, electrical detection and
water-soaking detection during production to avoid gas leakage and
4. Full inspection on bigger parts such as compressors, condensers,
evaporators, expansion valves, flow switches, controllers etc.
Selection inspection for small parts such as sensors, pressure
5. Well noise control by using mute cotton for casing plates and
soft rubber feet for floating compressors, some of the models use
compressor isolation shields.
6. Well insulated with insulated cotton for every pipe and parts,
include compressor, dryer filter and each pipes.
7. We have passed TUV and SGS inspections. We have CE, Ro HS, IEC,
CCC, CB certificates for most of our products. Some of our products
have en14511 test, en14825 test.
8. 100% test before shipment.
A. Payment service
T/T, 30% deposit, 70% balance before shipment.
B. Technical service
1. We calculate the capacity and recommend the best models.
2. We supply you the professional refrigeration technical support
and electronic technical support for your installation, debugging
3. We supply the spare parts and technical support in and after the
4. We supply the training course to your workers at our factory or
site traning if you need.
C. After-sales service
1. Technical support for your installation, operation and
2. Standard warranty time: One years’warranty for heat pumps
You can also pay for extended warranty or we can renegotiate the
longer warranty period.
3. Spare parts and technical support at most economic prices after
Q1. Can I have a sample order for Heat pump or Water tank?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: Sample needs 3-10 days, mass production time depend on the
Q3. Do you offer guarantee for the products?
A: Yes, 12 months since the heat pump depart from the port of
loading (Refer to the Bill of Lading).
Certificate we have got :
1> ISO 9001, ISO 14000
2> Our company has been inspected and certificate by EMC
3> CE And EN14511, EN 14825-ERP for heat pump exported to Europe
4> Energy label for all heat pump models sold to over sea market
5> Testing laboratory calibrated by CNAS
1). We were established in 2001.
2). We are a professional heat pump manufacturer, Located around
Baiyun Air port.
3). We are trading on Meeting Brand ,Meeting heat pump Well-know
brand we mainly operate in Europe market.
4). Our company has been inspected and certificated by TUV and SGS.
5). We are the one of the first manufacturers whose heat pumps are
with top COP gaining grants from Chinese government.
6). We passed ISO 9001 quality management system and ISO14000
environment protection system.
7). Our testing laboratory can test heat pump up to 60KW heating
capacity and create testing air temperature condition during
-25℃~45℃, according to EN14511 standard.
8). Our leading products: Air to water heat pump, Water chiller, DC
inverter heat pump, High water temperature heat pumps,
Mono block house heating heat pumps, Split heat pump, super low
noise heat pump
Heat pump dryer, Ground source heat pump, water to water heat pump,
swimming pool heat pump