Million Ming Machinery produced polypropylene grinding machine
features as follows:
1, PP material melting point is low, in the milling process prone
to sticky material, and our company can for this characteristic, PP
material into powder
2, The highest output value of 2 and 20 mesh PP materials can reach
3, equipment comes with air cooling, water inlet to complete water
4, user-friendly design, easy to learn
5, fully comply with the state policy, no dust pollution
1, Compared with other pulverizers, the capacity is 20-50 percent
increased with same power and the energy is saved.
2, Install the dust collection device, reduce the dust pollution
3, The labor is reduced with fan discharge.
4, The door of main machine can be opened which is convenient to
maintain and replace blades.
5, Adopt double cold (water and fan),the inner temperature of body
is decreased and the material pulverized is not distortional. t is
beneficial to pulverize the thermo-sensitive plastic, for example
1. This type can grind all kinds Hard & Soft materials into
10-100 mesh powders in normal temperature.
2. A widely use range, PVC/PE/PP/ABS/PS/PA/PC Materials.
3. This machine has a much higher output, 2 or 3 times than normal
miller, equip with dust collector. An ideal energy saving machine
in plastic industries.
4. This miller includes automatic feeder, main engine, air fan
conveying, cyclone separator, automatic shaker screen, auto coarse
material milling ,high-efficiency dust collector system.
5. The sword adopts imported stainless steel, durable, can work
6. Knives can be adjusted easily, easily maintained and controlled.
7. Main shaft adopted SKF, matched with imported oil pump, can be
used about 3 years in normal usage.
|Main motor||Rotating motor||Φ610mm|
High and low voltage protection
Dust collecting bag protection with 9 bags