New A5 hud head up display
It displays driving datas on the front windshield such as speed,
rpm, fuel consumption, water temperature,voltage; avoiding drivers
become dangerous because of watching the instrument while driving.
Drivers can read the driving information instantly, and can always
keep the best state on the way with HUD.
1. Available for any car, easy to install, plug and play
2. Two mode display: reflect on windshield or directly see on the
sit up HUD screen
3. Screen 3.5 inch HD display
4. Multi-color design makes the screen more abundant and easier to
5. Nano-technology to eliminate double reflections,more clear.
6. Rich Contents: speed,compass, speed alarm,free switch between km
7. Auto power on/off: HUD start and off with vehicle started and
shutdown, effective protection of the car battery;retaining the
manual switch mode,more easy to control HUD.
8. Automatic and manual brightness adjustment mode,driving without
Model: A5 hud
Function: Speed, RPM, Overspeed Alarm,etc.
Environment temperature: -40c- + 80c
Atmospheric pressure: 86-106KPa
Relative Humidity: 10% -95%
Environmental noise: <= 60dB (A)
Alarm sound level: "= 30dB (A)
Working voltage: 9V ~ 16Vdc (12Vdc / 400mA)
HUD size: 9*5.4*1.2(cm)
HUD Weight: 40g
Package Size: 17*13*5(cm)
Cable Length: 1m
Use and installation for reflection film:
Please Note: HUD projects dashboard information on the car front
windscreen , because the windscreen is double, which will make
double reflection on the windscreen when it works.The double
reflection will be different because of the different windscreen.If
you can see clear the display information, then there is no need to
use the reflection film. If there is a double image, then please
use the reflection film.
First, please put the non-slip mat on the dashboard, and then put
HUD on it.Reflection film can be stick to the position right above
the HUD position which can reflect host screen to windscreen.
Methods of pasting the film:
1.Spray some water on the place that the film will be pasted on,and
then use a dry cloth to clean it;
2. Take off the back side(marked 1) of reflection film,then paste
it to the window glass.
3. After you have adjusted the location, you can use a scratch
board or something else flat to slick the film and squeeze the
water inside out until there is no bubble or water in it.
4. Take off the protection film (marked 2) of the reflection film.
If the film cannot display the whole information, please adjust the
non-slip mat to move the position.
First use of HUD
When it is the first time to use, please connect car charger to car
cigarette lighter, after get charged, red satellite icon flash and
start to search the satellite number, when the satellite icon
become green color, HUD can work.
1x A5 Head Up Display
1 x Reflective Film
1 x USB Cable
1 x Antiskid Pad
1 x English User Manual