300W Fiber Laser Metal Sheet Cutting Machine for 1mm - 3mm
Machine consists of machine host, computer control systems, fiber
laser cutting head, chillers, auxiliary decency components.
Machine gantry structure, using Japan YASKAWA servo motors drive
rack and pinion feed, high precision and fast speed, dual-drive
gear and rack transmission instead of the traditional ball screw
transmission which makes the machine empty moving speed up to
Bed gantry, machine welded structure, aging treatment after
annealing, roughing, finishing, can completely eliminate stress
welding and machining, rigid, high precision, can be maintained
long-term use not deformed.
1. Fiber laser cutting machine is for metal precise cutting powered
by fiber laser technology. The quality fiber laser beam results in
faster cutting speeds and higher quality cuts compared to other
cutting solutions. The key advantage of a fiber laser is its short
beam wavelength (1,064nm). The wavelength, which is ten times lower
than that of C02 laser, generates high absorption into metals. This
makes the fiber laser become a perfect tool for cutting metal
sheets of stainless steel, carbon steel, mild steel, aluminum,
2. The efficiency of a fiber laser on a large extent exceeds
traditional YAG or CO2 laser. The fiber laser beam is capable of
cutting reflective metals with much less energy as the laser is
absorbed into the metal been cut.
3. Another advantage of fiber laser is the use of highly reliable
single emitter diodes with projected lifetimes greater than 100,000
hours of continuous or pulsed operation.
4. Taishun Laser software allows for the capability to control
power, modulation rate, pulse width and pulse shape giving the user
full control of the lasers capabilities.
1. Kitchen ware sheet metal cutting
2. Elevator /kitchen ware/hardware metal tag cutting
3. Metal furniture material cutting
4. Advertising board sheet metal,stainless steel,aluminum cutting
5. Metal promotional gift/craft material cutting.
|Effective Cutting Area||3000×1500 mm|
|X Axis Cutting Length||3000 mm|
|Y Axis Cutting Width||1500 mm|
|X Y Axis Position Accuracy||0.05 mm|
|X Y Axis Repeat Position Accuracy||0.03 mm|
|Machine Outer Material||Cast Iron|
|Continuous working time||24 Hours|
Packaging and delivery
1. Standard plywood case, its compressive strength and bearing
quality is better.
2. the board area is bit, the soil structure is good, it is better
in leakproofness and waterproof.
3. when importing, the plywood case is with fumigation-free, the
procedure is simple.
4. Delivery Detail: within 20-25 days after received your payment.