3 Phase 4 Wires LoRaWAN Energy Meter Electric Kwh Meter With LCD
DTS150 series FBR(LoRaWAN) three phase four wire electric energy
meter adopts advanced SMT production design and manufacture.
Besides measure active energy, it also has function for online
power display, smart anti-tamper, overload control, remote meter
reading and etc.
It sends data to corresponding gateway through LoRaWAN wireless
It has advantages in high accuracy, low power consumption, and good
stability that can be widely used for the single phase alternating
current in city, rural areas or factory enterprises, etc.
Measurement: threephase voltage, threephase current, active power,
reactive power, power factor, frequency, active energy, reactive
Calculation: positive and negative active energy, inductive and
capacitive reactive power.
Display: LCD display, high quality and high definition.
Communication: LoRaWAN, RS485 communication, and DL/T645 protocol.
Standard and qualification:
|Standards||IEC 62053-21: 2003, DL/T645-1997/2007|
|Accuracy Class||Class 1.0, 2.0|
|6400, 3200, 2400, 1600, 1200, 800, 400, 200|
|Clock Accuracy(optional)||≤ 0.5s/Day (Refer to temperature of 23 centigrade);|
|Data Storage Period||≥ 10 years, the working time lasts more than 5 years even if power
|Power Consumption||≤ 0.8 W/Phase|
|Normal working temperature||-25℃~ +55℃|
|Limited working temperature||-45℃~ +70℃|
|Creeping design||Have the function of intelligent logical anti-creeping.|
Programmable voltage and current ratio
Standard: IEC 62052-11, IEC 62053-21, IEC 62056-21
Anti-Tampering Detection: Terminal cover and top cover open
Resistance on High frequency jamming circuit
Prevention of Missing Potential
Resistance on neutral disturbance
Using uni-directional counter system
Precise metering of active electric energy
Remote reading of real-time electric quantity through low-voltage
Remote switching-in and load control, indicating of power-up or
Mutual auto relay
LCD, power failure flashing
Freezing of electric quantity, daily frozen electric quantity kept
for 7 days; Daily hour total active power meter code stored for 3
Multi-rate and stepped electric energy supported
Three modes switching supported: Normal, stepped rate, time shared
Alarming of loss of phase, current loss, and overloaded power off,
overpower load value settable
Event recording, recording of programming, timing, tripping,
dumping, and uncapping events
IR communication, RS485 communication, and power carrier
IR and power line carrier programming availablev
The block diagram of the power meter hardware is as follows: Mainly
consists of main chip 78F0485, metering module, relay control part,
LCD display, RS485 communication circuit, LoRaWAN
communication circuit, electric pulse output circuit, data saving
circuit, power supply circuit and
status indication circuit. Its principle block diagram is shown in
1. Q: Are you trading company or manufacturer ?
A: We are factory.We are not only a factory,but also solutions
provider and meter designer.
2. Q: Do you have a catalogue? Can you send me the catalogueto have
a check of all your products?
A: Yes , We have product product list. Please contact us online or
send an Email to sending the catalogue.
3. Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample ,but not freev