Intelligent 60 Degree Small Aperture Ink paper Professional Gloss
Meters NHG60M With Calibration Plate
Marbles that meet national standards should have a gloss of between
60 and 90 (by grade). The gloss of the marble can be measured using
a 3nh NHG60 marble gloss meter.
In the current natural marble sheet standard, the gloss value is
graded, and the minimum gloss reading value of the same grade
marble is different due to the chemical main component contained in
the stone. The minimum gloss value of superior products is divided
into three categories according to different chemical main
components, which are 90, 80, and 60 gloss units, respectively.
This minimum gloss value takes into account the influence of the
composition, mineral composition and chemical composition of the
stone on the polishing process, combined with a large amount of
Waxing is the safest way to maintain the gloss of automotive paint.
Although the effective period is short, the maintenance effect is
good and the damage to the paint is small. The NHG60M paint Professional Gloss Meters is not only used to detect gloss, but also to detect uniformity.
It is a better instrument.
For the maintenance of automotive paint gloss, the safest method is
to wash the car and wax.
Waxing may be the shortest effective period relative to the coating
and sealing glaze, and the damage to the paint is also minimal, and
the protection effect is also good.
The NHG60M paint Professional Gloss Meters is a professional instrument for detecting the gloss of paint. It
can also be used to judge the uniformity of paint gloss. It can be
used to test the paint before and after waxing to judge the
NHG60M gloss meter adopts small aperture 1.5*2mm, with 60° angle,
manufactured according to ISO2813 and GB/T 9754. It is also
compatible with the standards of ASTM D523, ASTM D2457. NHG60
conforms to JJG696 first class gloss meter working requirement,
corresponding with CIE 1931(2°) under CIE C light source.
NHG60M gloss meter can test material with gloss (0-1000Gu), and
universally apply to paint, ink, stoving varnish, coating, wood
products; marble, granite, vitrified polished tile, pottery brick
and porcelain; plastic, paper; hardware industries, etc. for gloss
measurement and gloss data transmission.
1. Small aperture: 1.5*2mm
2. 60° angle for semi gloss
3. Display 5 sets of measurement data, good for comparison
4. Measuring mode: basic measurement, statistical measurement,
continuous measurement, QC measurement (only for GQC6 software).
5. Continuous mode to check uniformity over large areas
6. Connect to PC, more extend functions
7. Input gloss value manually
8. Large touch screen operation, easy to use
9. Beauty appearance, good man-machine communication interface
10. Powerful functions to meet many different requirements
11. Large storage to save over 5000 data
12. Built-in lithium ion rechargeable battery.
|NHG60M Small Aperture Gloss Meter |
Comply with standard ISO 2813,GB/T 9754,ASTM D 523,ASTM D 2457
|Measuring Area (mm)||1.5*2|
|Measurement Range Repeatability Reproducibility||0-10GU 10-100GU 100-1000GU|
± 0.1GU ± 0.2GU ± 0.2%GU
± 0.2GU ± 0.5GU ± 0.5%GU
|Measurement Standard||Conform with JJG696 first class gloss meter working requirement|
|Chromaticity Corresponding||Corresponding with CIE 1931(2°) under CIE C light source|
|Errors||±1.5 , ± 1.5%|
|Dimension||L*W*H : 160mm*75mm*90mm|
|Battery||3200mAh Li-ion Battery, >10000 times(within 8 hours)|
|Viewing Screen||TFT 3.5 inch, capacitive touch screen|
|Data Save||Basic mode: 1000, Statistical Mode: 5000, Continuous mode : 5000|
|Software||GQC6 Quality Control Software with QC report printing functions and
more extended functions.|
|Humidity||<85% relative humidity, no condensation|
|Standard Accessories||Power Adapter, USB cable, User Manual, CD (Including QC software),
|Optional Accessories||Miniature Printer|
|Note||The specifications are subject to change without notice.|
Professional Gloss Meters NHG60M is widely used in various industries, including:
1. Paint coating (can be used for surface gloss of doors and
windows, wood, furniture, silicon wall surface, etc.)
2. Decoration materials (can be used for decorative surface gloss
of interior and exterior walls, cylinders, door frames, etc.)
3. Building materials (the floor is a kind of building material
such as solid wood laminate flooring, bamboo wood flooring, cork
4. Plastic materials (plastic parts such as household appliances,
instrumentation, household hardware, etc.)
1: Q: Is your company accept customization?
A: We accept OEM/ ODM. Any color and any logo is welcome if placed
at least 10pcs.
2: Q:Does your products have warranty?
A: YES, We offer 1 year warranty. Our policy: Is there any quality
problem, First, send the defective machine to us and you bear the
freight. Second, we send back to you free after fixed.
3: Q: After an order placed, when to deliver?
A: It depends on whether we are in stock or not. If we are,
generally we can arrange shipment in 1 days after payment. If not,
it will be decided by factory production.
4: Q: How to place an order?
A: a: send us an inquiry.
b: confirm your wanted products
c: confirm the price and freight and other details
d: finish the payment
e: we arrange the shipment
f: you got your products
Shenzhen ThreeNH Technology Co., Ltd
Add: 4/F, Building 8, Nangang Second Industry Zone, Xili, Nanshan
District, Shenzhen, 518055 China.
Tel: 0086-755-27198826 Ext: 601