Cable Making Machine Manufacturer Back-twist Sun & Planetary
Laying up Machine
The machine is used for stranding Cu, Al wire, ACSR and insulated
wires with back-twist. It also can steel-armoring or Cu-screening
1. Back-twist method : planetary mechanism.
2. The non-axle thimble twisting cage is equipped with mechanism
friction tension control.
3. The transmission shafts link all the machine parts together to
keep stable stranding pitch, which can also be chosen frequency
synchronization to control the machine.
4. The machine is widely used, and manipulated conveniently with
Pay-off, mainframes of 6-reel section, 12-reelbsection, 18-reel,
24-reel and 30-reel, die holder, tape lapper, armor unit, haul-off,
take-off, driven system and electrical system.
|Model (Planetary Stranding Machine)||JLY-315||JLY-400||JLY-500||JLY-630|
|Diameter of single wire||Copper||φ1-1.6 mm||φ1-4 mm||φ1.2-5 mm||φ1.5-5 mm|
|Aluminum||φ1.2-2 mm||φ1.2-4 mm||φ1.4-5 mm||φ2.0-5 mm|
|Maximum stranded conductor OD||φ14 mm||φ28 mm||φ35 mm||φ45 mm|
|Stranding Pitch||6 Bobbin Stranding Cage||26-435||39-695||44-770||48-840|
|12 Bobbin Stranding Cage||30-526||43-774||47-858||50-928|
|18 Bobbin Stranding Cage||34-639||47-858||55-1001||65-1201|
|24 Bobbin Stranding Cage||38-749||51-940||63-1151||75-1601|
|Rotating Speed||6 Bobbin Stranding Cage||218 r/min||120 r/min||106 r/min||55 r/min|
|12 Bobbin Stranding Cage||118 r/min||110 r/min||97.5 r/min||45 r/min|
|18 Bobbin Stranding Cage||108 r/min||100 r/min||82.9 r/min||35 r/min|
|24 Bobbin Stranding Cage||98 r/min||90 r/min||74 r/min||25 r/min|
|Capstan||Capstan Wheel Diameter||1000 mm||1600 mm||1800 mm||2000 mm|
|Maximum Haul-off Force||2T||5T||10T||15T|
|Motor Power||18.5 KW||22 KW||37 KW||55 KW|
|Bobbin Size||315 mm||400 mm||500 mm||630 mm|
|Center Payoff Bobbin||315 mm||1250 mm||1600 mm||1600 mm|
|Take-up Bobbin||1250 mm||2000 mm||2000 mm||2500 mm|
|Maximum Haul-off Linear Speed||25 m/min||30 m/min||34.7 m/min||20 m/min|
|Central Height||1000 mm||1000 mm||1000 mm||1100 mm|
The key gearboxes adopt the best gearboxes in China. The gearbox is
almost no noise.
The host body is back-twisting stranding. Supporting wheels support
the host body. Bobbin cage adopts end shaft clamping device, which
equipped with safety locking device. The wire tension adopts
friction tension. The machine is equipped with six stage gear-box
with positive inversion, pneumatic brake device, the whole welding
chassis. The bobbin cage is welded.
630 half cut type steel tape armoring machine is optional. This
armoring head is with six stage gear box, oil pump lubrication. It
can run forward, reverse and neutral. This machine is applicable to
maximum diameter 630mm steel tape. Mechanical friction tension is
adjustable. Angle of steel tape can be adjustment by the worm gear.
This machine is applicable for different steel tape armoring.
Mechanical friction belt or friction disc controls the wire pay-off
tension. This kind of wire tension is manually adjusted type. And
the friction is stable from full bobbin to empty bobbin.
Magnetic hysteresis controls the wire pay-off tension. This kind
can be controlled by PLC, and a series of data for the pay-off
tension is set in the PLC. The wire tension is more stable, from
full bobbin to empty bobbin. The tension adopts analog quantity or
real-time feedback type. This is a kind of passive pay-off tension
The motor and small gearbox control the pay-off bobbin by
synchronous belt. The wire tension is changed according to
real-time wire tension feedback system. This is a kind of active
pay-off tension system. The wire tension is from 0 to a maximum
data. This kind of machine is usually used for making OPGW cable
and other cable which needs precise wire tension.