Experienced Quality Inspection Services For Coating / Painting / Blasting

CORROSION, PAINTING & BLASTING qc inspection services with experienced inspector on call

1. Failure of paint

The main reasons of paint failure after application on surface are the applicator and improper treatment of surface. For paint qc inspection services application Defects can be attributed to:
-Dilution
This usually occurs when the dilution of the paint is not done as per the manufacturer’s recommendation. There can be a case of over dilution and under dilution, as well as dilution with the incorrect diluents.
-Contamination
Foreign contaminants added without the manufacturer’s consent which results in various film defects.
-Peeling/Blistering
Most commonly due to improper surface treatment before application and inherent moisture/dampness being present in the substrate

-Chalking

Chalking is the progressive powdering of the paint film on the painted surface. The primary reason for the problem is polymer degradation of the paint matrix due to exposure of UV radiation in sunshine and condensation from dew.

-Cracking
Cracking of paint film is due to the unequal expansion or contraction of paint coats. It usually happens when the coats of the paint are not allowed to cure/dry completely before the next coat is applied. The degree of cracking can be assessed according to International Standard ISO 4628 Part 4 or ASTM Method D661 (Standard Test Method for Evaluating Degree of Cracking of Exterior Paints).

-Erosion

Erosion is very quick chalking. It occurs due to external agents like air, water etc. It can be evaluated using ASTM Method ASTM D662 (Standard Test Method for Evaluating Degree of Erosion of Exterior Paints).

-Blistering

Blistering is due to improper surface exposure of paint to strong sunshine. The degree of blistering can be assessed according to ISO 4628 Part 2 or ASTM Method D714 (Standard Test Method for Evaluating Degree of Blistering of Paints).

-Dangers
Volatile Organic Compounds (VOCs) in paint are considered harmful to the environment and especially for people who work with them on a regular basis. Exposure to VOCs has been related to organic solvent syndrome, although this relation has been somewhat controversial.

2. Common Technical Stadards for paint qc inspection services

3. Why choose INF qc inspection services

Our local qc inspection services team are close to these manufacturers and most of them have experiences of inspection/audit in these factories, they are familar with their QC system and products. With this advantage, our inspector can catch the critical inspection points quickly without "adaptive phase", this will means cost and time saving for our clients.

paint qc inspection services/ coating qc inspection services/ blasting qc inspection services

INF is a leading Quality Control Service Provider, serving global brands, importers, and retailers of Industry and Consumer Products from more than 135 countries since 2005. With 120+ QC engineers, and expertises in technical parts, hardlines, softlines, consumer electronics products, INF delivers Quality Control services for 1000+ customers all over the world.

With 10+ years QC experiences, INF is committed to be the reliable and strong support in global trade flows.