|Drive Type||Hand push||Price|
|Max. Cutting Depth||269mm|
|N.W. / G.W.||31 /35kg|
In addition, there are 2 models with the same design as " RY- 36x-1
" , but different in Engine Type , Displacement and Cutting Width .
|Models||Engine Type||Displacement||Cutting Width|
1 . Check all parts before use, especially whether the rotary
cultivator is installed with reverse and fixed bolts and universal
joint lock pins are firm . If problems are found , it should be
dealt with in time and used after confirmation .
2 .When the power is not cut off when turning on the ground, the
rotary cultivator shall not lift too high, and the transmission
Angle at both ends of the universal joint shall not exceed 30
degrees, and at the same time, the engine speed shall be
appropriately reduced . The power of rotary cultivator should be
cut off when moving the plot or travelling long distance, and then
locked up after rising to the highest position .
3. No one is allowed to approach the rotating part when the rotary
tiller is in operation, and no one is allowed behind the rotary
tiller in case the blade is thrown out. The advance speed during
farming should not be too high to prevent the overload of the
tractor and damage the power output shaft.
4 . When the rotary tiller is working, the tractor wheels should
walk on the uncultivated land to avoid compacting the cultivated
land. Therefore , it is necessary to adjust the tread of the
tractor to make the wheels within the working amplitude of the
rotary tiller . When working, should pay attention to the way of
walking, prevent the other wheel of the tractor compacted already
cultivated land . In the operation, if the blade axis too much
winding grass should be stopped in time to clean , so as not to
increase the machine load .
5. The tractor and suspension part are not allowed to take
passengers in rotation , in case of accidental damage by rotary
6. When using the rotary cultivator group of walking tractor, the
rotary tiller can only be hung when the secondary gear lever is in
the "slow" position .If you need to reverse at work, you must put
the secondary gear lever in neutral to hang the reverse gear .Try
not to use steering clutch in rotary farming , use push and pull
arm rest to correct direction . When turning on the floor, you
should first reduce the accelerator, lift the handrail, then pinch
the clutch, do not bend dead, in case of damage parts .
1. First , the rotary cultivator can realize one-time operation in
the process of operation. The use of rotary tiller greatly reduced
the number of operations, saving time and energy consumption .
2 . Second, the ability to break soil.In time the rotary cultivator
operates on dry land .
3 . Third, productivity is extremely high.In the process of
operation, the vertical structure size and soil entry travel are
relatively short , resulting in the corresponding reduction of the
ground head, cocoa greatly improve its productivity .