Waste Plastic Process Waste Oil To Diesel Machine 50% To 90% Oil
Function of Waste Oil To Diesel Machine
The function of the equipment is utilizing the waste plastics to be
catalytic cracked in Atmospheric pressure reactor, and then the
organic polymer chain in waste plastics is cut off and reduced to
low molecular weight hydrocarbons, fuel oil. The combustible
unsolidified gases under C5 gas generated by the equipment is
recycled by the gas recovery unit and the transported fuel burner
by pipeline after steady pressure. So it is heated by itself and
eliminates the secondary environmental pollution.
Our Waste Oil To Diesel Machine plant adopts the latest pyrolysis
technology, and have obtained several patents and certificates
after decades of innovation and development. It has been widely
recognized at home and abroad, with superior performance,
competitive price, high efficiency, maintenance convenience and
Our skilled professionals will supply customers with optimal
all-in-one solutions required on civil drawings, installation &
commissioning and personnel training as well as after-sale service.
Main raw material: PP, PE and PS.
Power required: around 280KWH / Ton
Daily capacity to process waste plastic: between 10 tons to 500
Oil ratio: between 50% to 90% according to the different raw
The 4 final products we get after pyrolysis and distillation. And
the usages of them is below.
1- The refining oil
(1) diesel oil (0# or 5#)
It contains 75 - 80% for all oil. And it can be used in forklift
and other engineering truck, vessel, generator and etc.
(2) gasoline oil
It contains around 20% for all oil. And it can be as car oil after
blending with oil of higher octain value in 1:1, or it used in gasoline generator directly.
It will be reused. (The combustible gas generated in processing can
be recycled as fuel to heat equipment itself, which will save a lot
of energy for the whole plastic pyrolysis process.)
It will be reused as condensation water.
It can be made active carbon and carbon rod or combustion alongwith
coal and carbon.
After sales service
- The equipment of turnkey project, main body quality assurance of
two years (except for violation of operating regulations and
- Life-time maintenance
- Technology upgrading service for paid lifetime.
- Before ordering, please do a plastic market research investigation
seriously. Only reliable raw material insurance can guarantee your
- Equipment production and storage area are of key fire-proof area,
no fireworks; please stay away from the residents living area.