Overhead Line Construction Tools Forward Handle Effective Length
1200mm Lifting Wire Rope Pulling Lever Hoist
- Forward lever and backward lever: Placed in tandem providing a slim
design and assuring power transfer along the center.
- Rope clamp system: Use lever to remove easily, can install wire
- Spare shear pins: Two pieces of spare shear pins locked in the
- Cast aluminum alloy body: Light weight, simple operation. Smooth
contour design with large and flat surfaces at the bottom improves
stability in horizontal and vertical positions.
1. Scope of application:
Wire rope wrench hoist is suitable for operation in narrow areas
where local space is limited.
For field operations, aerial work, lifting operations in the deep
well operation of the GXSM-618 1.6 wire rope hand hoist and the
inorganic electric energy supply site will show special advantages.
2. Working principle:
The wire rope hand pull hoist is a kind of clamping body acting on
the movement load in rotation with the aid of the lever principle
to obtain the straight line traction matching the load and to
operate with the support load.
3. How to use:
The forward (backward) handle is first pulled to the machine, and
then the handle is released by hand to the front of the machine.
The wedge can be clipped into the upper and upper steps of the
shell. At this time, the upper and lower clamps in the front, rear
clamps are opened, and can be worn (pulled) through. Then the clamp
can be pushed forward and down to release the handle, so that the
clamp can clamp the wire rope (or reset) and put into operation.
4. Novel body structure:
This machine adopts two-stage gear transmission, and the high-speed
stage is helical gear transmission, so the transmission is stable.
It adopts high-strength aluminum alloy body, which is beautiful in
appearance, compact in body and light in weight.
5. High strength of parts:
The upper and lower hooks are made of high strength alloy steel and
have high toughness after strengthening heat treatment. Even if the
body is damaged due to overloading, the hooks will only produce
plastic deformation without brittle fracture.
The main parts of the machine are made of high-grade alloy steel
material and processed by many special heat treatment processes. It
has the characteristics of high strength and good wear resistance.
|Model||GXSM-618 0.8||GXSM-618 1.0||GXSM-618 1.6||GXSM-618 3.2||GXSM-618 5.4|
|Rated load lifting capacity||ton||0.8||1||1.6||3.2||5.4|
|Stroke when the rated||mm||≥52||≥52||≥55||≥28||≥30|
|Forward handle effective length||mm||825||825||1200||1200||1200|
|Wire rope diameter||mm||8||8||11||16||20|
|Wire rope standard length||m||10, 20||10, 20||10, 20||10||10|
|Hand force when the rated||N||≤284||≤353||≤412||≤441||≤745|