Competitive price, well accepted by our customers.
Availability in stock, blades can be sent to our customers in a
Carbide blades have a significantly higher life expectancy than
high speed steel blades.
Cemented carbide requirements for WC grain size of tungsten carbide
Different grades of WC (tungsten carbide) are used for cemented
carbides of different applications. Carbide cutting tools: such as
cutting machine blades, V-CUT knives and other finishing alloys
using ultra-fine, sub-fine, fine-grained WC, rough-working alloys
using medium-grain WC, gravity cutting and heavy-duty cutting
alloys using medium and thick Particle WC is used as raw material;
mining tool: high rock hardness, large impact load, coarse particle
WC, small rock impact and small impact load. Medium particle WC is
used as raw material; wear-resistant parts: when emphasizing its
wear resistance, compression resistance and surface finish When
using ultra-fine, sub-fine, fine, medium-grain WC as raw materials,
the impact-resistant tools are mainly medium and coarse-grain WC
Made from 100% virgin raw material.
Ultrafine grain sizes
Produced with advanced equipments and process
All products go through in process and final inspection
Stable and continuous production ability
Drag blades: used in non-powered tools such as UCT, KCT, VCT, SCT,
Particularly suitable for Foils, Paper, Thin folding carton,
PVC,Plastic ,Carpet ,Light foam core etc.
Oscillating blades: used in EOT / POT oscillating tools.
Recommended materials: Folding carton, Gasket materials, Foam,
Leather,Rubber, Felt,Woven , Textiles, Plastic etc.
Rotary blade: decagonal (ten-sided) blades for DRT / PRT tools.
Recommended for breathable materials such as textile, carbon fibre,
glass fibre, etc.
Coating blade mark and use recommended
|ISO classification||Mark||uses||Cutting speed(m/min)|
|P||YBC151||High wear-resistant matrix and ultra-thick composite coating for
|YBC251||A tough base with good edge safety and a coating of MT-TiCN for
semi-finishing of steel.||160-440|
|YBC351||The highly plastic matrix and the composite thick coating are
suitable for roughing of steel.||130-380|
|M||YBM151||Suitable for finishing and semi-finishing of stainless steel.||110-280|
|YBM251||Suitable for semi-finishing of stainless steel.|
|YBM351||Suitable for rough finishing of stainless steel.|
|K||YBD052||The chemical ultra-thick coating combines with a hard matrix to
provide excellent wear resistance in high-speed dry cutting of grey
|YBD102||Chemically coated grade for high speed cutting of ball cast iron.||200-480|
|YBD152||Good anti-flaking, suitable formedium- and high-speed turning in
cast iron, and can withstand slight interrupted cutting at medium
|YBD252||Suitable for turning in medium and low speed wet milling and
intermittent conditions of cast iron with toughness requirements.||150-380|
Recommended cutting amount ( B04 )
|Raw material||processing method||Mark||Cutting speed(m/min)|
|rough finish machining||YBC351||130-380|
semi finish machining,
rough finish machining
|K||cast iron||fine machining||YBD052||200-500|
|semi finish machining||YBD151||180-450|
|rough finish machining||YBD252|