Electrical Insulating Liquid Silicone Gel for Electronic Potting is a newly insulating material silicon of silicon compounds.
It cures with no heat, no corrosion and little shrinkage. It can be
applied to the sealing and pouring of various electronic
components, and then forming insulation system.
Application of Electrical Insulating Liquid Silicone Gel for
-air filter potting
-bonded seal of electronic components
-power module and control module, which requires waterproof and
-LED screen, Wind Power Generator, PCB substrate,PP,ABS,PVC etc.
- silicone breast pad, artificial breast, silicone bra, simulation
breast, silicone nubra
Technical Parameters of Electrical Insulating Liquid Silicone Gel for Electronic Potting:
|HY-9405||Water clear/ Blue||750±50||/||1:1||1~2||12~14|
Advantages of Electrical Insulating Liquid Silicone Gel for Electronic Potting:
*Solvent free two component material
*Transparent both before and after cured
*Platinum catalyzed curing system
*No by-products after curing
*Low viscosity before cured, easy to application
*Excellent flexibility, free from stress
*Extremely low oil exudation, good anti-poisoning
*By adjusting the mix rate of part A and part B, can adjust the gel
*It can stick repeatable
*It can use with polyethylene release liner
*Pass test of physiological compatibility, poison cell, skin
*Excellent electrical properties and waterproof.
Operation instructions of Electrical Insulating Liquid Silicone Gel for Electronic Potting:
1, Pls put part A and part B in separate container and stir evenly
before mixing the two part together.
2, Weight Ratio: part A: part B = 1:1
3, Deaeration the mixture under 0.08 MPa for 3 minutes.
4, The temperature influences the curing time: When in too low
temperature, we suggest customers appropriately heat the mixture to
Warm tips during operation:
1.The following material may hinder the curing of the product, So pls
apply after summary experiment. When necessary, pls clean the
Condensation silicone which not completely cured or organic tin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux.
2. Should be sealed storage.The mixture should be used up at once,
avoid causing waste.
3. Silicone belongs to non-dangerous goods, but keep away from mouth
4. When it gets stratified after a period of storage, Please mix 9301
evenly before using, it does not affect the performance.
FAQ of Electrical Insulating Liquid Silicone Gel for Electronic Potting:
1, What' s silicone products you are making ?
--Liquid silicone rubber, silicone oil, Due to different silicone
molds, we gave silicone in different viscosity, and casue different
hardness, density to meet the requirement of our clients.
2, Do you offer free sample to client ?
--Yes, we can provide the sample.
3, How about the quality control in your factory ?
--We have our QC team to control during production, goods will be
100% inspected before shipment.