Home > Money Boxes >

Filter Bags & Filter Socks for Industrial & Chemical Applications • Filter, industrial filter bags nylon mesh filter ba

Model Number: WHATSAPP: 0086 137 8096 4661
Certification: SGS, ISO, FDA, HACCP, EN13432
Place of Origin: CHINA
Payment Terms: T/T
Supply Ability: 1 MILLION PER WEEK
Delivery Time: 15 DAYS
Packaging Details: 500/CASE
aliquoting Blender: Filter membrane
separating solids and liquids: bag mouth opening
Filtra-Bag: BLENDER
Water Sampling Kits: Water Sampling BAGS
Sterile bags: sampling bags
testing bags: LAB TESTING BAGS
sterile sampling blender bags: sampling manipulations
Stomacher Blender: Bag Mixer
Side Filter Blender Bags: BagFilter
Microperforated filter bags: filter bags
lab sterile sampling blender bag with filter: sampling blender bag with filter
Nasco: Burkard
Dow Corning: Nalgene
Nasco sampling bag: Nasco STERILE sampling bag
Nasco SAMPLE bag: Nasco bag
Whirl-Pak bags: lab blenders
Standard Blender Bags: Filter Blender Bags
Stand-Up Blender Bags: Plain Blender Bags
VWR® Sterile Sample Bags: Sterile Sample Bags at Thomas Scientific
Fisherbrand Sterile Sampling Bags with Flat-Wire Closures: sterile sample bags: Industrial & Scientific
Sterile sampling bags and kits | Labplas: Labplas
Lab Equipment & Supplies: Lab Supplies
Sample Collection and Transport: AIR SAMPLING
bioproducts: Medical Testing Bags
Microbiology Supplies: Air Tight Sampling Plastic Bags
  • Product Details
  • Company Profile

Filter Bags & Filter Socks for Industrial & Chemical Applications • Filter, industrial filter bags nylon mesh filter ba

Sterile sampling bag
1, a variety of specifications to choose from
2, the wire seal, sealing is good
3, transparent and with writing area can be choosen from
4, sample bag using gamma ray sterilization
5,No DNA enzyme, No RNA enzymes
Using way:
1, broke the dotted line seal
2, open the mouth to open both sides cross bracing
3, put the sample bag
4, grabbed on both ends of the wire and scroll three to four times
5, on both sides of the iron wire to fold sealed bag

Bagease sterile sampling bags are specially designed bag for microbiological analysis in variety of sizes, which are used as disposable laboratory consumables in a wide range. Applications vary from general blending purposes to samples preparation for analysis testing. For instance, it’s available for the dilution of meat, fish, fruits and vegetables.

The feature of bags is compatible with any lab blenders. On the top of bag, two stainless steel wires are fixed by tapes close to the seal. They apply to transferring and blending samples in various purposes of experiment. There are printing and no printing bags for different customer needs. Sterile sampling bags are manufactured from high quality poly ethylene which is transparent for easy observation. Bags are available for all sample types: food, blood, hair, cloth, soil and others.

To avoiding cross contamination, bags are sterile by Gamma or E.O. irradiation. They can be resistant to high temperature of 100 degrees. All Bagease sterile sampling bags are packaged in bags with sterilization, RNase-free, DNase-free and Non-pyrogenic

Product feature:
1. Various volumes for different testing
2. Specialized for sampling and temporary storing.
3. All bags are sterilized with Gamma irradiation
4. RNase-free, DNase-free and Non-pyrogenic.

Packaging information:
Composite film bags are used for packaging
Lot number is printed on packaging for tracking
Cartons are customized for protecting products from damage.

Colour Sterile Sampling Bags

bags with tape colors of white, blue, and red for 4oz (118ml), 18oz (532ml), 24oz (710ml), and 55oz (1,627ml) bags. This exciting new feature allows you to isolate samples according to the colored tape, providing an instant visual indicator for each section of the lab or plant, differentiate between treated and non-treated samples, or keep allergens separated from regular samples

White Tape
Part Number
Blue Tape
Part Number
Red Tape
Part Number
4 oz
3" x 7¼"
B01062(WT)WA B01062(BT)WA B01062(RT)WA $83.44 / Pack 500
18 oz
4½" x 9"
B01065(WT)WA B01065(BT)WA B01065(RT)WA $123.71 / Pack 500
24 oz
6" x 9"
B01297(WT)WA B01297(BT)WA B01297(RT)WA $166.43 / Pack 500
7½" x 12"
B01195(WT)WA B01195(BT)WA B01195(RT)WA $273.25 / Pack 500

Environmental Surface Sampling Bags

bag is designed for environmental surface sampling of work areas, equipment, animal carcasses, and any other place where testing for Listeria, Salmonella, E. Coli, coliforms, and other foodborne pathogens, or anthrax is required.

The special dry sponge is free of bactericides and has been tested to be non-inhibitory. It measures approximately 1½” x 3” x 5/8” (3.8 x 7.6 x 1.5cm) thick when wet, and is sterilized inside a Whirl-Pak® bag. Wearing a sterile glove when wiping with the sponge is recommended to help prevent contamination. After the sample has been collected and the sponge returned to the bag, it can be sent to a lab for testing. In the lab, media may be added directly to the bag, and the sample incubated inside the bag for a +/- test, or the sample may be squeezed out of the sponge, pipetted, and plated out.

The 55oz bag is designed to be used in a homogenizer blender for thorough mixing of the sample and media for USDA-ARS standard procedure to identify foodborne pathogens

Available with a sterile, ambidextrous, large size polyethylene glove attached in a bottom compartment
Environmental surface sampling can be faster and easier by using the pre-moistened bags. The sponge is ready to use and is hydrated with 10ml of neutralizing buffer that will neutralize several surface sanitizers including quaternary ammonium compounds, phenolics, iodine preps, chlorine preps, mercurials, formaldehyde, and glutaraldehyde. To use, squeeze out excess buffer from the sponge - this can be done by squeezing the sponge from the outside with two hands or squeezing the sponge with a sterile gloved hand after opening the bag. Wipe the surface to be tested, return the sponge to the bag, close, and send to the lab for analysis.

The buffer has a 24 month shelf life from date of manufacture and each carton is marked with an expiration date; no refrigeration is necessary. The bags are packaged in a foil liner bag to prevent evaporation of the buffer. Buffer contains monopotassium phosphate, sodium thiosulfate, and aryl sulfonate complex.

Description Capacity Dimensions Part Number Price
Dry Speci-Sponge 18oz (532ml) 4½” x 9” B01245WA $141.40 / Pack 100
Dry Speci-Sponge with Sterile Glove B01392WA $294.77 / Pack 100
Dry Speci-Sponge 55oz (1627ml) 7½” x 12” B01299WA $200.74 / Pack 100
Hydrated Speci-Sponge with Neutralizing Buffer 18oz (532ml) 4½” x 9” B01422WA $314.79 / Pack 100
Hydrated Speci-Sponge with Neutralizing Buffer and Sterile Glove B01423WA $386.72 / Pack 100

Sterile Blender Bags

Bags are specially designed for use with homogenizer blenders. They are made from extra-heavy polyethylene and have special features to make sample testing easier and more efficient.

Round Bottom Seal
The B01239WA bag features a special round bottom seal designed to minimize sample fragments from getting caught in the corners of the bag during blending.

Filter Blender Bags
Filter Bags contain a third layer of finely perforated polyethylene film, which filters out solids in the blended sample, allowing for easy pipetting of the liquid. The hole diameter in the filter layer measures .013 inches (.33 mm), 330 microns, and there are 1,840 holes per square inch (285 per square cm). The filter layer inside the bag is sealed into the sides and bottom perimeter, allowing the sample to be placed in the bag on either side. Liquids of a blended sample will transfer through the filter, while solids remain on one side.

Stand-Up Blender Bags
These bags have a special gusset on the bottom which flattens out when the sample is placed inside, allowing it to stand up completely by itself. Both hands are free to work with the sample.

Plain Blender Bags
When the sample does not have to be retained, these bags are designed for quick testing and disposal. Usually the sample is homogenized, tested and then discarded. The bags are sterilized and made of heavy-duty polyethylene. Bags are packaged with 50 in a sealed liner bag. Cut the liner and pull the bag out by the bottom. These are quality without the wire-closing tab.

Standard Blender Bags

Capacity Dimensions Description Part Number Price
13 oz 5¼" x 7½" Standard B01018WA $118.00 / Pack 500
24 oz 6" x 9" Standard B01063WA $179.45 / Pack 500
24 oz 6" x 9" Write-On B01196WA $187.37 / Pack 500
55 oz 7½" x 12" Write-On B01195WA $261.50 / Pack 500
52 oz 7" x 13" Round Bottom B01239WA

$298.97 / Pack 500

Filter Blender Bags

Capacity Dimensions Part Number Price
7 oz 3¾" x 7" B01385WA $195.00 / Pack 250
24 oz 6" x 9" B01348WA $254.98 / Pack 250
55 oz Standard 7½" x 12" B01318WA $303.00 / Pack 250
55 oz No Closure 7½" x 12" B01547WA $215.00 / Pack 250
69 oz 7½" x 15" B01416WA $320.37 / Pack 250
92oz 10" x 15" B01488WA $238.91 / Pack 100
138oz 15" x 15" B01525WA $256.50 / Pack 100

Stand-Up Blender Bags

Capacity Dimensions Part Number Price
24 oz 6" x 9"