Fireproof Sliding Partition Wall Flame - Retardent Wide Range
Sliding Partition Wall is built for using the space flexibly , pull out wall panel from
wall side and construct a solid wall to cut the big space to
smaller room for different purpose.
Let us assist you find the best flexible solution for your space
and turn your room into the space you love.Different face is
available like Wooden Veneer,Woven Fabric,Acoustic Fiber and
Vinyl,Etc. We can also custom-made the face as your design.
Feature and benefits
- Bracket and welded steel frame
- magnetic male and female panel joint
- Top&bottom retractable pressure seal
- Up to 58dB soundproof
- Exposed or concealed edge is available
- Demountable panel faces can be changed easily
- Last close panel with telescopic sleeve panel
- A full professional design service as your shop drawings
- Using top quality materials and components
- Survey and installation guide
- A rich experienced work team
- Maintenance contracts- to ensure your valuable asset remains in
Our easy lock-up set.
Retractable pressure seals on top and bottom are extended and
retracted by a single 180°turn removable operating handle.
Retractable Pressure Seals.
Once the panel is positioned, they are sealed in place with
retractable pressure seals
Telescopic sleeve panel.
Final closure of the wall is achieved by extending a telescopic
sleeve on the last panel. The sweep strip simultaneously extends
the top and bottom. The rubber sealing strip on the side edge of
telescopic panelcan seal the wall tightly to reach acoustic
|Opening Height (From false ceiling to finished floor)||From 5000mm to 7500mm|
|Opening Width or Length (From wall to wall)||600mm to 1200mm|
|Insulation Finishing||12mm MDF with 0.5mm galvanized sheet|
|Headroom: (Height between False Ceiling and concrect slab bottom)||Min 250mm|
|Panel Parking/Stacking Arrangements:||Centre Stacking (Yes / No)|| |
|Side Stacking (Yes / No)|| |
|Remote Stacking (Yes / No)|
|Panel suspension||Top hung only|
|Track system||Single or twin point|
|Panel height||Up to 6000mm,Heights greater than 6000mm refer to our Technical
Dept.inset Pass doors above 2400mm.Full Height pass door up to
3000mm high Document 'M'disabled doors-optional|
|Max height||6000mm with heavy duty track|
|Fire safety||optional Class I or O|
|Vertical profiles||Aluminium,anodised with sealing profiles,painted-optional|
|Retractable seals||Aluminium,black with double rubber seals|
|Operation of seals||Manual,with supplied operating handle|
|Locking||Optional lock to pass doors|
|Pass Doors||Single open in oanel or double open in two panel|
|Sound insulation||Rw40,44,47,50,53,58dB Rw|
|Weight||Approx 43-50kg/sq MApprox 63-70kg/sq M|
Wall Panel Stacking
Panel Finish: Available on Request as below or other special
1. How to select the suitable movable wall for your site?
We have 4 types of movable wall,65type,80type,100type and 125
ultra-high type. You can choose the right movable wall upon the
Height and Soundproof requirement as following,
NW821type-- Max height 3.5m, soundproof: 38dB to 43dB
NW835type- Max height:5.5m,Soundproof: 43dB to 53dB
NW840type--- Max height:7m,Soundproof: 43dB to 58dB
NW849-125ultra-height---Max height:17m,Soundproof: 38dB to 48dB
2. What you should do on site?
A beam(truss) should built on site for track installation.The min
distance leaving for track installation from false ceiling to top
ceiling is 200mm.
3. How to install?
We will provide the installation manual and video guiding the
installation job. We can also dispatch the installation engineer
supervising the installation job on site as request.
4. What is lead time?
The lead time is 7 days to 10 days.For large quantity,about
5. How to transport?
Sea transportation is a usual way of transportation. In an
emergency, can go by air
6. How do the goods packing?
corrugating paper packaging, MDF batten cover all around corner.
The movable wall panel and track, fittings will be packed
7. What is Procurement procedure?
1) send us the shop drawings(if the shop drawings is not available,
you can tell us the height from false ceiling to finished floor and
width from wall to wall)
2) we offer you the movable wall layout drawings for your
3) we quote the movable wall in accordance with confirmed drawings.
8. What is finishing face?
The bottom panel is MDF or plywood, which is unfinished face. You
can do decoration on site, such as wallpaper, paint, etc.
We can also provide the product with finished face, such as faux
wood, Woven fabric and Leather.